You just need to push and hold the button until you hear a separate beep after the ascending tones. Then, it is in pairing mode. You shouldn't have to enter any numbers at all.
Good luck. Lois From: [email protected] [mailto:[email protected]] On Behalf Of Sieghard Weitzel Sent: Saturday, February 09, 2013 12:27 PM To: [email protected] Subject: RE: PLANTRONICS BACKBEAT HEADPHONES Hi Alex, A quick Google search for "Plantronics Backbeat User Guide" produced the user guide in PDF format. After I opened it I did a Jaws virtual find (Jaws Key+Control+F) and searched for "pairing". The first few results were from the table of contents, pressing F3 a few times easily found the following: 1. Turn on your phone's or device's BluetoothR feature. 2. With the headphones powered off, press and hold the Power/Pairing button until the LED indicator flashes blue and red. 3. Use the phone or device menu to search for the Bluetooth headphones and select BackBeat. See your phone's or device's user guide for more information. 4. If prompted, enter 0000 for the PIN code/passkey. Some phones also require that you accept the connection. Pairing is successful when the LED indicator flashes blue. Quite a few headsets use this method, i.e. you turn the device on and simply hold the power button for a few more seconds to put the device in pairing mode. Obviously many of us can't see if the LED flashes blue and red or when it flashes blue after successful pairing, but checking your iPhone's list of Bluetooth devices usually works, if the headset goes into pairing mode it will show up in the list and of course Voiceover will switch to the headset once it's paired and connected. I also attached the PDF copy of the user guide, maybe save it in a place where you can find it again for next time. Regards, Sieghard -- You received this message because you are subscribed to the "VIPhone" Google Group. To search the VIPhone public archive, visit http://www.mail-archive.com/[email protected]/. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/viphone?hl=en. --- You received this message because you are subscribed to the Google Groups "VIPhone" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the "VIPhone" Google Group. To search the VIPhone public archive, visit http://www.mail-archive.com/[email protected]/. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/viphone?hl=en. --- You received this message because you are subscribed to the Google Groups "VIPhone" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
