Got it. It now takes over the new radeon card.
0d:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc.
[AMD/ATI] Navi 14 [Radeon RX 5500/5500M / Pro 5500M] [1002:7340] (rev c5)
Subsystem: ASRock Incorporation Device [1849:5123]
Kernel driver in use: vfio-pci
Kernel modules: amdgpu
0d:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Navi
10 HDMI Audio [1002:ab38]
Subsystem: ASRock Incorporation Device [1849:5123]
Kernel driver in use: vfio-pci
I had to change the vfio-pci options when adding to the boot line like this:
vfio-pci.ids=1002:7340,1002:ab38
from this:
/etc/modprobe.d/rad.conf
options vfio-pci ids=1002:7340,1002:ab38
On 6/3/20 5:03 PM, Roger Lawhorn wrote:
Thank you,
I had considered this.
Is the format to put it on the command line different?
You need to build it as a module and not built in.
With it built in, the options need to be on the kernel boot line, and
not in the modprobe.d config files.
On 6/3/20 4:18 PM, James Courtier-Dutton wrote:
On Mon, 1 Jun 2020 at 14:38, Roger Lawhorn <r...@twc.com> wrote:
ok.
$ grep VFIO config-5.4.43-050443-generic
CONFIG_KVM_VFIO=y
CONFIG_VFIO_IOMMU_TYPE1=y
CONFIG_VFIO_VIRQFD=y
CONFIG_VFIO=y
CONFIG_VFIO_NOIOMMU=y
CONFIG_VFIO_PCI=y
CONFIG_VFIO_PCI_VGA=y
CONFIG_VFIO_PCI_MMAP=y
CONFIG_VFIO_PCI_INTX=y
CONFIG_VFIO_PCI_IGD=y
CONFIG_VFIO_MDEV=m
CONFIG_VFIO_MDEV_DEVICE=m
# CONFIG_SAMPLE_VFIO_MDEV_MTTY is not set
# CONFIG_SAMPLE_VFIO_MDEV_MDPY is not set
# CONFIG_SAMPLE_VFIO_MDEV_MDPY_FB is not set
# CONFIG_SAMPLE_VFIO_MDEV_MBOCHS is not set
so if it's built in, then why does it not load?
I am thinking that they changed how you define vfio-pci options in
some way.
I define them in a config file in /etc/modprobe.d/ and then rebuild all
ramdisks.
_______________________________________________
vfio-users mailing list
vfio-users@redhat.com
https://www.redhat.com/mailman/listinfo/vfio-users
_______________________________________________
vfio-users mailing list
vfio-users@redhat.com
https://www.redhat.com/mailman/listinfo/vfio-users
