Dear All,
I can't get the video card which is using vfio to connect to my vm:
lspci -nnk
06:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc.
[AMD/ATI] Turks XT [Radeon HD 6670/7670] [1002:6758]
Subsystem: ASUSTeK Computer Inc. Device [1043:03ea]
Kernel driver in use: vfio-pci
Kernel modules: radeon, fglrx
06:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI]
Turks/Whistler HDMI Audio [Radeon HD 6000 Series] [1002:aa90]
Subsystem: ASUSTeK Computer Inc. Device [1043:aa90]
Kernel driver in use: vfio-pci
Kernel modules: snd_hda_intel
I start the vm from cli with qemu command with sudo
The devices 06:00.0 and 06:00.1 are together in group 22
I added /dev/vfio/22 to acl in qemu config
When using vfio_iommu_type1.allow_unsafe_interrupts=1 on start vm I get the
error:
stdout:
qemu-system-x86_64: -device vfio-pci,host=06:00.0,addr=09.0,multifunction=on:
vfio: Error: Failed to setup INTx fd: Device or resource busy
qemu-system-x86_64: -device vfio-pci,host=06:00.0,addr=09.0,multifunction=on:
Device initialization failed
dmesg:
genirq: Flags mismatch irq 55. 00000080 (vfio-intx(0000:06:00.0)) vs. 00000800
(fglrx[1]@PCI:6:0:0)
Without vfio_iommu_type1.allow_unsafe_interrupts=1 on start vm I get the error:
stdout:
vfio: failed to set iommu for container: Operation not permitted
dmesg:
vfio_iommu_type1_attach_group: No interrupt remapping support. Use the module
param "allow_unsafe_interrupts" to enable VFIO IOMMU support on this platform
system:
sabertooth 990FX v1.1
AMD FX-8120
main GPU: Radeon HD 5xxx
VM GPU: Radeon HD 6xxx
Manjaro (arch) kernel 4.1
Kind regards,
Stein
_______________________________________________
vfio-users mailing list
vfio-users@redhat.com
https://www.redhat.com/mailman/listinfo/vfio-users
