Hi Dirk, if you have a solution, pls reply the answer to your question. You have written your solution in the vdr portal.
For the others: The pids of the channel have changed. After creating a new channels.conf the channel can be received. 2010/10/25 Rainer Blickle <rainer.blic...@googlemail.com>: > Hi, > > perhaps the pid's have changed. Pls do a rescan (with wscan or so) and > compare the newly generated channels.conf with your entry. > > > > 2010/10/22 Dirk E. Wagner <m...@wagner-budenheim.de>: >> Hi, >> >> On 18.10.2010 12:00, vdr-requ...@linuxtv.org wrote: >>> >>> I have a strange problem with a relatively new DVB-T/SD/MPEG2 channel in >>> Sweden. If I try to record from it all I get is a zero-byte file and VDR >>> restarts after the standard 30 seconds reporting the infamous "ERROR: >>> video >>> data stream broken". All other channels on that mux are perfectly OK in >>> VDR. >> >> I can confirm this problem with vdr 1.6 and 1.7 with DVB-T channel Super-RTL >> in Rhein-Main-Area in Germany. I posted this in the german vdr forum, but >> without response: >> >> http://vdr-portal.de/board/thread.php?threadid=99985 >> >> The Super-RTL channel worked for a long time without problems. Since several >> weeks the problem arise, so I think the dvb stream was changed. >> >> _______________________________________________ >> vdr mailing list >> vdr@linuxtv.org >> http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr >> > _______________________________________________ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
