Hi,

perhaps the pid's have changed. Pls do a rescan (with wscan or so) and
compare the newly generated channels.conf with your entry.



2010/10/22 Dirk E. Wagner <m...@wagner-budenheim.de>:
> Hi,
>
> On 18.10.2010 12:00, vdr-requ...@linuxtv.org wrote:
>>
>> I have a strange problem with a relatively new DVB-T/SD/MPEG2 channel in
>> Sweden. If I try to record from it all I get is a zero-byte file and VDR
>> restarts after the standard 30 seconds reporting the infamous "ERROR:
>> video
>> data stream broken". All other channels on that mux are perfectly OK in
>> VDR.
>
> I can confirm this problem with vdr 1.6 and 1.7 with DVB-T channel Super-RTL
> in Rhein-Main-Area in Germany. I posted this in the german vdr forum, but
> without response:
>
> http://vdr-portal.de/board/thread.php?threadid=99985
>
> The Super-RTL channel worked for a long time without problems. Since several
> weeks the problem arise, so I think the dvb stream was changed.
>
> _______________________________________________
> vdr mailing list
> vdr@linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
>

_______________________________________________
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr

Reply via email to