Hi! Did you check with ‘mender show-artifact’ and/or ‘uhd_config_info --version’ which version is active now?
What does \`uhd_usrp_probe’ return? Please also note that the ethernet link speed of the SFP ports is defined by the FPGA image which is active. The FPGA image flavors are described here: https://files.ettus.com/manual/page_usrp_x4xx.html#x4xx_updating_fpga_types . This means that you need to load the X4_200, X4_400 or X4_1600 FPGA image if you want to use 10 GbE (QSFP28 Port 0 needs to be used - please check that you did not accidently connect QSFP28 Port 1). The CG_400 and CG_1600 FPGA image is needed for 100 GbE (on both QSFP28 Port 0 and QSFP28 Port 1). Kind regards,\ Jörg
_______________________________________________ USRP-users mailing list -- usrp-users@lists.ettus.com To unsubscribe send an email to usrp-users-le...@lists.ettus.com
