Tim, it looks like you're doing everything correctly. What's the filename of the cal file (you can blank out the serial)?
Are you building from source? If so, can you please recompile with cmake -DUHD_LOG_MIN_LEVEL=trace and set the environment variables UHD_LOG_LEVEL=trace UHD_LOG_CONSOLE_LEVEL=trace ? This will tell you where it's trying to look for the cal file. --M On Mon, Feb 3, 2025 at 10:29 AM Tim Vancauwenbergh < tim.vancauwenberg...@gmail.com> wrote: > Hi, > > I've performed the power calibration for RX on a usrp b200 mini. The file > is saved at /home/[username]/.local/share/uhd/cal/ > When running print(usrp.has_rx_power_reference()) it returns False, > despite the calibration data being available. > The webpage https://files.ettus.com/manual/page_power.html lists nothing > about required directory. > My question: how can I load the calibration data, I would like to use this > to determine the received power. Later on I would also calibrate the TX to > get a known TX power level. > > Thanks! > > Best regards, > > Tim Vancauwenbergh > _______________________________________________ > USRP-users mailing list -- usrp-users@lists.ettus.com > To unsubscribe send an email to usrp-users-le...@lists.ettus.com >
_______________________________________________ USRP-users mailing list -- usrp-users@lists.ettus.com To unsubscribe send an email to usrp-users-le...@lists.ettus.com
