Hi Seppo, hard to say why the USRP isn't showing up on the PCIe bus. I've only ever used the official NI PCIe extension card ( https://www.ettus.com/all-products/pcie-kit/), in principle, I don't see why your card wouldn't work, but it's not something we can help with, unfortunately.
BTW, if you are able to get a 10 GbE card, you can exceed the rates of the PCIe link, with almost no downsides compared to PCIe. --M On Fri, Nov 22, 2024 at 11:21 AM <seppo.j.rant...@vtt.fi> wrote: > Hi, I cannot get the NI-2943R (=Ettus x310) connected to the PC via the > PCIe transport connection. The Ettus firmware is upgraded to the currently > latest one, UHD version is UHD_4.7.0.0-0ubuntu1~jammy1. The default HG > image was uploaded to Ettus. The upload was done via SFP+ Port 0 Interface, > 1GbE copper SFP connected. Since I had Terasic PCIe x4 Cable Adapter (PCA) > conversion card available, I would like to use that instead of 1GbE SFP > port. > > PC is Precision 3680 Tower WS. The OS is Ubuntu 22.04.5 LTS with kernel > Linux 6.8.0-49-generic. The NI Linux device drivers were installed > according to the guide: > https://files.ettus.com/manual/page_ni_rio_kernel.html > > Command lspci -k -d 1093:c4c4 returns nothing. I checked the Terasic PCIe > x4 PCA LEDs during operation: If I first power on the NI-2943R before > powering up the PC as recommended, the LEDs on PCA stay off. In the other > order, powering up NI-2943R after the PC, the D2 edge, D3 power and DN2-DN4 > (signal detect output for CH_B, receiver detect outputfor CH_A0 and CH_B0). > > I have tried various grub options, disabling power saving modes there and > so on but now just more or less helpless. Does anyone has had similar > issues with the similar HW. > > I attached output list of dmidecode, lspci and lshw commands. > > _______________________________________________ > USRP-users mailing list -- usrp-users@lists.ettus.com > To unsubscribe send an email to usrp-users-le...@lists.ettus.com >
_______________________________________________ USRP-users mailing list -- usrp-users@lists.ettus.com To unsubscribe send an email to usrp-users-le...@lists.ettus.com
