On 05/12/2024 18:15, Arnaldo Sans wrote:
Hello Team,
I am operating a set of X310 in communication link, and I seem to be
encountering data under and overflow problems very regular while
operating at 2.5Msps… my target is at least 100MSps. Are there any
suggestions you can offer? My MCR is 200MHz.
Thank you, look forward to hearing from you.
If you're getting under/over-runs at 2.5Msps, then either your computer
is *WOEFULLY* inadequate or you're doing
WAY more processing per sample than perhaps you should be.
I run a dual-polarization radiometer based on an X310 and it can stream
2x20Msps for hours at a time.
https://kb.ettus.com/USRP_Host_Performance_Tuning_Tips_and_Tricks
Also, is your Ethernet interface a "real" Ethernet interface or
1GBit-over-USB? Some of those have notoriously
poor performance.
/Regards,//
/
*/AJ/*
*/Grad/**/uate Researcher/*
/College of Electrical & //Computing// Engineering /
/Florida International University/
/10555 West Flagler Street/
/Room 3863B/
/Miami, FL 33174/
/Phone: 305-336-2541 | Email:////_asans...@fiu.edu
<mailto:asans...@fiu.edu>_/
_
_
_______________________________________________
USRP-users mailing list --usrp-users@lists.ettus.com
To unsubscribe send an email tousrp-users-le...@lists.ettus.com
_______________________________________________
USRP-users mailing list -- usrp-users@lists.ettus.com
To unsubscribe send an email to usrp-users-le...@lists.ettus.com
