Ethan,
I could never find any pre-wired cable assemblies for the E310 connector, but
the housing and female pins are cheaply available:
DF20A-10DS-1C Housing........................Digikey P/N: H3143-ND $0.30 each
DF20F-2830SCFA Female Pin............... Digikey P/N: H3148CT-ND $0.10 each
The crimping tool that is commercially used is very expensive:
https://www.mouser.com/ProductDetail/Hirose-Connector/HT302-DF20B-2830S?qs=7H2Jq%252ByxpJL7ruPcF4WDUg%3D%3D
. You might try an alternative crimper, they work.
Good Luck,Ray
On Saturday, February 24, 2024 at 09:12:48 PM EST, Ethan C
<ethanclarke...@gmail.com> wrote:
Hello all,I am looking for the part number for the GPIO connector (J12) on an
E310. So that I may buy a cable to connect to it. I can't find any information
online nor on the physical connector itself on the E310 I have.
Thanks,Ethan VA7MNK
_______________________________________________
USRP-users mailing list -- usrp-users@lists.ettus.com
To unsubscribe send an email to usrp-users-le...@lists.ettus.com
_______________________________________________
USRP-users mailing list -- usrp-users@lists.ettus.com
To unsubscribe send an email to usrp-users-le...@lists.ettus.com
