Hello, The technical details for the issue are as follows:
Host Machine: ubuntu 16.10 laptop (with lan to usb converter) with uhd drivers with version UHD_4.4.0 USRP X310: The USRP has been rarely used. Previously the green light used to blink on the SFP0 port, now it does not. The USRP x310 is programmed with SFP0 as 1GB and SFP1 as 10GB. The SFP port has been purchased as accordance from [here](https://kb.ettus.com/X300/X310#Guidance_on_10Gb_SFP.2B_to_RJ45_Adapters). The SFP-10G-T with specs (10GBASE-T-SFP+ 30m) maybe this one <https://www.fs.com/de-en/products/66612.html> The SFP 10G is being used for the SFP0(1gb one) - I think higher one should not be an issue for lower data rate. LAN cable has 1gb data rate. “lsusb” is performed since the lan to usb converter is being used. Initially, the USRP was not being detected and the ip address could not be assigned to the host machine. Hence, via JTAG the USRP was programmed in default fashion. Now, the USRP gets detected and the IP address of host is set to be 192.168.10.1. However, pinging is not successful. The error is “destination is not reachable.” Now, the issue is mostly a networking issue. But having tested everything related to the networking as mentioned in the documentation, the green light over the SFP0 does not work and the pinging is not successful. Need help upon this.
_______________________________________________ USRP-users mailing list -- usrp-users@lists.ettus.com To unsubscribe send an email to usrp-users-le...@lists.ettus.com
