Thanks Marcus. Can you suggest a way to test this hypothesis?
What package do the utilities come from? What specific libraries are involved? thanks Achilleas On Tue, Sep 26, 2023 at 5:06 PM Marcus D. Leech <patchvonbr...@gmail.com> wrote: > On 26/09/2023 16:53, Achilleas Anastasopoulos wrote: > > Hi all, > > > > I have installed gnuradio/uhd in 10 computers in a lab (almost > > identical setups). > > These are Ubuntu 20.04.4 LTS focal > > The connected USRPs (X300) work fine in all 10 computers. > > > > However, two of them result in a core dump when trying to use > > calibrating utilities as follows: > > > > $ uhd_cal_tx_dc_offset > > > > Creating the usrp device with: ,ignore_cal_file=1,ignore-cal-file=1... > > [INFO] [UHD] linux; GNU C++ version 9.4.0; Boost_107100; > > UHD_4.2.0.0-0ubuntu1~focal1 > > [INFO] [X300] X300 initialization sequence... > > [INFO] [X300] Maximum frame size: 1472 bytes. > > [INFO] [X300] Radio 1x clock: 200 MHz > > Running calibration for UBX TX > > Daughterboard serial: 3158306 > > Calibration frequency range: 10 MHz -> 6000 MHz > > Dterminate called without an active exception > > Aborted (core dumped) > > > > > > I found some similar questions on the Internet but not any definite > > answers. > > Are there any ideas on how to proceed with investigating that? > > > > thanks > > Achilleas > > > I'd suspect mis-match between utilities and libraries. > > > > > > > > > > FYI: > > > > $ uhd_find_devices > > [INFO] [UHD] linux; GNU C++ version 9.4.0; Boost_107100; > > UHD_4.2.0.0-0ubuntu1~focal1 > > -------------------------------------------------- > > -- UHD Device 0 > > -------------------------------------------------- > > Device Address: > > serial: 315C6B2 > > addr: 192.168.10.2 > > addr: 192.168.40.2 > > fpga: HG > > name: > > product: X310 > > type: x300 > > > > Also: > > > > $ uhd_usrp_probe > > [INFO] [UHD] linux; GNU C++ version 9.4.0; Boost_107100; > > UHD_4.2.0.0-0ubuntu1~focal1 > > [INFO] [X300] X300 initialization sequence... > > [INFO] [X300] Maximum frame size: 1472 bytes. > > [INFO] [X300] Radio 1x clock: 200 MHz > > _____________________________________________________ > > / > > | Device: X-Series Device > > | _____________________________________________________ > > | / > > | | Mboard: X310 > > | | revision: 11 > > | | revision_compat: 7 > > | | product: 30818 > > | | mac-addr0: 00:80:2f:22:64:6c > > | | mac-addr1: 00:80:2f:22:64:6d > > | | gateway: 192.168.10.1 > > | | ip-addr0: 192.168.10.2 > > | | subnet0: 255.255.255.0 > > | | ip-addr1: 192.168.20.2 > > | | subnet1: 255.255.255.0 > > | | ip-addr2: 192.168.30.2 > > | | subnet2: 255.255.255.0 > > | | ip-addr3: 192.168.40.2 > > | | subnet3: 255.255.255.0 > > | | serial: 315C6B2 > > | | FW Version: 6.0 > > | | FPGA Version: 38.0 > > | | FPGA git hash: be53058 > > | | RFNoC capable: Yes > > | | > > | | Time sources: internal, external, gpsdo > > | | Clock sources: internal, external, gpsdo > > | | Sensors: ref_locked > > | _____________________________________________________ > > | / > > | | RFNoC blocks on this device: > > | | > > | | * 0/DDC#0 > > | | * 0/DDC#1 > > | | * 0/DUC#0 > > | | * 0/DUC#1 > > | | * 0/Radio#0 > > | | * 0/Radio#1 > > | | * 0/Replay#0 > > | _____________________________________________________ > > | / > > | | Static connections on this device: > > | | > > | | * 0/SEP#0:0==>0/DUC#0:0 > > | | * 0/DUC#0:0==>0/Radio#0:0 > > | | * 0/Radio#0:0==>0/DDC#0:0 > > | | * 0/DDC#0:0==>0/SEP#0:0 > > | | * 0/Radio#0:1==>0/DDC#0:1 > > | | * 0/DDC#0:1==>0/SEP#1:0 > > | | * 0/SEP#2:0==>0/DUC#1:0 > > | | * 0/DUC#1:0==>0/Radio#1:0 > > | | * 0/Radio#1:0==>0/DDC#1:0 > > | | * 0/DDC#1:0==>0/SEP#2:0 > > | | * 0/Radio#1:1==>0/DDC#1:1 > > | | * 0/DDC#1:1==>0/SEP#3:0 > > | | * 0/SEP#4:0==>0/Replay#0:0 > > | | * 0/Replay#0:0==>0/SEP#4:0 > > | | * 0/SEP#5:0==>0/Replay#0:1 > > | | * 0/Replay#0:1==>0/SEP#5:0 > > | _____________________________________________________ > > | / > > | | TX Dboard: 0/Radio#0 > > | | ID: UBX-160 v2 (0x007d) > > | | Serial: 3158306 > > | | _____________________________________________________ > > | | / > > | | | TX Frontend: 0 > > | | | Name: UBX TX > > | | | Antennas: TX/RX, CAL > > | | | Sensors: lo_locked > > | | | Freq range: 10.000 to 6000.000 MHz > > | | | Gain range PGA0: 0.0 to 31.5 step 0.5 dB > > | | | Bandwidth range: 160000000.0 to 160000000.0 step 0.0 Hz > > | | | Connection Type: QI > > | | | Uses LO offset: No > > | _____________________________________________________ > > | / > > | | RX Dboard: 0/Radio#0 > > | | ID: UBX-160 v2 (0x007e) > > | | Serial: 3158306 > > | | _____________________________________________________ > > | | / > > | | | RX Frontend: 0 > > | | | Name: UBX RX > > | | | Antennas: TX/RX, RX2, CAL > > | | | Sensors: lo_locked > > | | | Freq range: 10.000 to 6000.000 MHz > > | | | Gain range PGA0: 0.0 to 31.5 step 0.5 dB > > | | | Bandwidth range: 160000000.0 to 160000000.0 step 0.0 Hz > > | | | Connection Type: IQ > > | | | Uses LO offset: No > > | _____________________________________________________ > > | / > > | | TX Dboard: 0/Radio#1 > > | | _____________________________________________________ > > | | / > > | | | TX Frontend: 0 > > | | | Name: Unknown (0xffff) - 0 > > | | | Antennas: > > | | | Sensors: > > | | | Freq range: 0.000 to 0.000 MHz > > | | | Gain Elements: None > > | | | Bandwidth range: 0.0 to 0.0 step 0.0 Hz > > | | | Connection Type: IQ > > | | | Uses LO offset: No > > | _____________________________________________________ > > | / > > | | RX Dboard: 0/Radio#1 > > | | _____________________________________________________ > > | | / > > | | | RX Frontend: 0 > > | | | Name: Unknown (0xffff) - 0 > > | | | Antennas: > > | | | Sensors: > > | | | Freq range: 0.000 to 0.000 MHz > > | | | Gain Elements: None > > | | | Bandwidth range: 0.0 to 0.0 step 0.0 Hz > > | | | Connection Type: IQ > > | | | Uses LO offset: No > > > > > > > > > > > > _______________________________________________ > > USRP-users mailing list -- usrp-users@lists.ettus.com > > To unsubscribe send an email to usrp-users-le...@lists.ettus.com > >
_______________________________________________ USRP-users mailing list -- usrp-users@lists.ettus.com To unsubscribe send an email to usrp-users-le...@lists.ettus.com
