Wade Fife wrote: > The MPM software on your device is older than the FPGA you're trying to > use. Because you're using master, they haven't published updated > filesystems with the new MPM yet, but there will be a release candidate > very soon for UHD 4.5 you could try. > > Wade > > On Tue, Aug 22, 2023 at 10:20 AM Zacharias M Komodromos > [zackk...@utexas.edu](mailto:zackk...@utexas.edu) > wrote: > > > Hello all! > > > > I currently have a USRP X410 connected to a host through a > > QSFP28-to-QSFP28 connection, and also connected to a router through the > > ethernet port (to which the host is also connected to). I am trying to get > > large BW captures with the USRP. I have been trying to use the CG_400 FPGA > > image which is fixed at 400 MHz but have been getting dropped samples. > > > > I noticed on the wiki that a new flavor, UC_200, was noted, so I switched > > to the master branch on UHD and built UHD from the master branch. Once I > > tried to then flash the image on my X410 with: > > > > uhd_image_loader --args type=x4xx,addr=192.168.1.19,fpga=UC_200 > > > > I got the following error: > > > > \[ERROR\] \[MPM.PeriphManager\] Component fpga is too new (current: 8.0.0, > > oldest compatible: 8.0.0, MPM version: current: 7.9, oldest compatible: 7.0) > > > > \[ERROR\] \[MPM.PeriphManager\] MPM compatibility infos suggest that the new > > bitfile is not compatible, skipping installation. Component fpga is too new > > (current: 8.0.0, oldest compatible: 8.0.0, MPM version: current: 7.9, > > oldest compatible: 7.0) > > > > Error: RuntimeError: Error during RPC call to \`update_component'. Error > > message: rpc::rpc_error during call > > > > I tried updating the X410 through a mender artifact, and also through > > “usrp_update_fs -t master,“ but any image I try to flash will produce the > > same error. When I run "uhd_config_info --version", the host returns "UHD > > 4\.4.0.0-265-ga2a04e31" and the x410 returns "UHD 4.4.0.0-0-g5fac246b." > > > > How should I proceed to be able to load the new images on the x410? What > > exactly needs updating and how? > > > > Thanks for the help! > > > > Zack > > > > --- > > > > USRP-users mailing list -- usrp-users@lists.ettus.com > > To unsubscribe send an email to usrp-users-le...@lists.ettus.com
Hello, If you can’t wait you can try to build SD card image yourself. You’ll need meta-ettus repository and update it so it point to the right UHD commit (the top of master branch).\ Look here for example what to change: https://github.com/EttusResearch/meta-ettus/commit/1ecf1fb30dce2281a1530d50ca76e84de0c98dd0 Additionally you’ll have to change branch name from UHD-4.4 to master. Then you can build SD card image. Some (not perfect) description of how to do that is in meta-ettus Readme.md. In case of problems ask. Best Regards,\ Piotr Krysik
_______________________________________________ USRP-users mailing list -- usrp-users@lists.ettus.com To unsubscribe send an email to usrp-users-le...@lists.ettus.com
