Dear all,
I am working on a measurement setup with the USRP X410. Since we wanted a higher sampling rate, we sitched from ethernet to 10gbit/s thunderbold.
With ethernet and a sampling rate of 2MHz, the flowgraph in gnuradio worked perfectly fine. Now, with 10gibt/s, also with 2MHz sampling rate (for the beginning-> will be higher later), the setup does not work well anymore.
GNUradio prints now
"LLLLLLLLLLL" and
"usrp_sink :error: In the last 802 ms, 181 cmd time errors occurred."
I did all what the suggestions I found here: https://kb.ettus.com/USRP_Host_Performance_Tuning_Tips_and_Tricks
E.g., MTU rates in the network configuration to 9000 etc.
Is there something else which I am missing? Any other important things to keep in mind while using 10gbit/s thunderbold?
Thank you very much for every little help.
Best,
Theo
_______________________________________________ USRP-users mailing list -- usrp-users@lists.ettus.com To unsubscribe send an email to usrp-users-le...@lists.ettus.com
