2 are back, the other 2 will probably need to be reflashed over jtag and NICs wont respond.
Thanks, From: Marcus D. Leech <patchvonbr...@gmail.com> Sent: Tuesday, July 25, 2023 10:08 AM To: Tillson, Bob (US) <robert.till...@baesystems.com>; usrp-users@lists.ettus.com Subject: Re: [USRP-users] Re: Network Link Issue External Email Alert This email has been sent from an account outside of the BAE Systems network. Please treat the email with caution, especially if you are requested to click on a link, decrypt/open an attachment, or enable macros. For further information on how to spot phishing, access “Cybersecurity OneSpace Page” and report phishing by clicking the button “Report Phishing” on the Outlook toolbar. On 25/07/2023 09:53, Tillson, Bob (US) wrote: Thanks for all your suggestions, turns out we do have multiple X310s actually not working all in the same rack, and its not just the NICs ☹ Everything is appropriate and I kinda fell into an internet trap of many reports of X710s not forming link, which I was thinking there may be some hidden knowledge of how to overcome based on past experiences. Thanks again, Thanks for replying, but your reply is a bit ambiguous. Did you get them going again? From: Marcus D. Leech <patchvonbr...@gmail.com><mailto:patchvonbr...@gmail.com> Sent: Monday, July 24, 2023 1:31 PM To: usrp-users@lists.ettus.com<mailto:usrp-users@lists.ettus.com> Subject: [USRP-users] Re: Network Link Issue External Email Alert This email has been sent from an account outside of the BAE Systems network. Please treat the email with caution, especially if you are requested to click on a link, decrypt/open an attachment, or enable macros. For further information on how to spot phishing, access “Cybersecurity OneSpace Page” and report phishing by clicking the button “Report Phishing” on the Outlook toolbar. On 24/07/2023 13:20, Tillson, Bob (US) via USRP-users wrote: Yeah, I know it worked in the past, but I am unclear on the pedigree since then… It does apply to all devices ☹ Well, if you're not getting link lights on ANY of the devices plugged into that NIC, I'd be suspicious of the NIC. If you aren't getting link on any of them, either the NIC has been hard programmed (via ethtool) to the wrong PHY rate, or the NIC is broken. Which cables are you using? Which port on the X310 machines? SFP0 is 1GBit with the default firmware, and 10GBit otherwise. From: Marcus D. Leech <patchvonbr...@gmail.com><mailto:patchvonbr...@gmail.com> Sent: Monday, July 24, 2023 1:09 PM To: usrp-users@lists.ettus.com<mailto:usrp-users@lists.ettus.com> Subject: [USRP-users] Re: Network Link Issue External Email Alert This email has been sent from an account outside of the BAE Systems network. Please treat the email with caution, especially if you are requested to click on a link, decrypt/open an attachment, or enable macros. For further information on how to spot phishing, access “Cybersecurity OneSpace Page” and report phishing by clicking the button “Report Phishing” on the Outlook toolbar. On 24/07/2023 12:16, Tillson, Bob (US) via USRP-users wrote: I have 4 X310s running 3.14.1 (I know, an ancient version) attached to a computer with Ubuntu 20.04. The NIC is an intel X710 4 port NIC running latest driver (2.22.20) and latest NVM firmware (7.1). When I connect the dual ended NIC cable (typical ettus part), I get no link lights on host or x310, so obviously no connection to host. I know this has happened in a very small number of cases before, just hoping someone has maybe found a solution, like the magic config setting on the X710 NIC or something like that? Obviously I would like to not have to upgrade as it is quite impactful at this moment and unclear it would actually fix the problem. Any thoughts? Thanks, To clarify -- this is a configuration that *stopped working*? Or a brand-new configuration that you're trying to get working? Does this apply to all your devices, or just one? _______________________________________________ USRP-users mailing list -- usrp-users@lists.ettus.com<mailto:usrp-users@lists.ettus.com> To unsubscribe send an email to usrp-users-le...@lists.ettus.com<mailto:usrp-users-le...@lists.ettus.com>
_______________________________________________ USRP-users mailing list -- usrp-users@lists.ettus.com To unsubscribe send an email to usrp-users-le...@lists.ettus.com
