On 02/05/2023 11:54, david.fernan...@viveris.fr wrote:
Hi Marcus,
I performed some tests with a spectrum analyser and a signal generator
as you have suggested and the problem seems to be in the RX side. Here
are the results :
*
If I do 1 way transmission [RF0, TX/RX] ==> [RF1, RX2] : OK, it
works everytime
*
If I do 1 way transmission [RF1, TX/RX] ==> [RF0, RX2] : OK, it
works everytime
*
If I do both ways transmission (Full Duplex [RF0, TX/RX] ==> [RF1,
RX2] & [RF1, TX/RX] ==> [RF0, RX2]) : NOT OK, I see that the TX
works well everytime (I see the signals in the Spectrum Analyser)
but the RX only works sometimes even when I use a signal generator
replacing the USRP TX.
_______________________________________________
USRP-users mailing list --usrp-users@lists.ettus.com
To unsubscribe send an email tousrp-users-le...@lists.ettus.com
Can you try upgrading to a newer release of UHD? Or even fall-back to
UHD 3.15?
_______________________________________________
USRP-users mailing list -- usrp-users@lists.ettus.com
To unsubscribe send an email to usrp-users-le...@lists.ettus.com
