Hi Jeff, I am getting this same error. Did you ever figure out the problem? Rob
On Sat, May 22, 2021 at 5:46 PM Jeffrey P Long <jpl...@mitre.org> wrote: > I am getting some weird error about a invalid time base clock name after > starting to create my own block. I did not see this just doing the simple > pass thru RFnoc example. What would this mean? > > Thanks > Jeff > > <https://aka.ms/o0ukef> > > > jplong@mm241897-pc:~/proj/ettus_e320/rfnoc-example/build/apps$ > ./txcore_block > [REGISTRY] WARNING: Attempting to overwrite previously registered RFNoC > block with noc_id,device_id: 0xb16, 0xffff > [REGISTRY] WARNING: Attempting to overwrite previously registered RFNoC > block with noc_id,device_id: 0xde30, 0xffff > > Creating the RFNoC graph with args: ... > [INFO] [UHD] linux; GNU C++ version 9.3.0; Boost_107100; > UHD_4.0.0.0-122-g75f2ba94 > [INFO] [MPMD] Initializing 1 device(s) in parallel with args: > mgmt_addr=192.168.30.5,type=e3xx,product=e320,serial=31DCD15,claimed=False,addr=192.168.10.5 > [INFO] [MPM.PeriphManager] init() called with device args > `mgmt_addr=192.168.30.5,product=e320'. > [INFO] [0/Radio#0] Performing CODEC loopback test on channel 0 ... > [INFO] [0/Radio#0] CODEC loopback test passed > [INFO] [0/Radio#0] Performing CODEC loopback test on channel 1 ... > [INFO] [0/Radio#0] CODEC loopback test passed > [INFO] [0/DmaFIFO#0] BIST passed (Estimated Minimum Throughput: 1361 MB/s) > [INFO] [0/DmaFIFO#0] BIST passed (Estimated Minimum Throughput: 1361 MB/s) > [ERROR] [MPMD::MB_IFACE] Invalid timebase clock name: > [ERROR] [RFNOC::GRAPH] Caught exception while initializing graph: > LookupError: KeyError: [MPMD_MB::IFACE] Invalid timebase clock name: > Error: RuntimeError: Failure to create rfnoc_graph. > _______________________________________________ > USRP-users mailing list -- usrp-users@lists.ettus.com > To unsubscribe send an email to usrp-users-le...@lists.ettus.com >
_______________________________________________ USRP-users mailing list -- usrp-users@lists.ettus.com To unsubscribe send an email to usrp-users-le...@lists.ettus.com
