On 08/03/2023 03:37, STEFANI, Maurizio (External) via USRP-users wrote:

HI,

after loaded a fresh copy of FPGA on our x310, I issued the command:

-uhd_usrp_probe

the results of this are:

mau@mau-Vostro-3500:~$ uhd_usrp_probe
[INFO] [UHD] linux; GNU C++ version 10.2.1 20201207; Boost_107400; UHD_3.15.0.0-4build1
[INFO] [X300] X300 initialization sequence...
[INFO] [X300] Maximum frame size: 1472 bytes.
[INFO] [X300] Radio 1x clock: 200 MHz
Error: AssertionError: Failed to find a valid XML path for RFNoC blocks.
Try setting the environment variable UHD_RFNOC_DIR to the correct location
mau@mau-Vostro-3500:~$

I do not know how to proceed, set the environment variable or other.

Thank you

maurizio

The information in this e-mail is confidential. The contents may not be disclosed or used by anyone other than the addressee. Access to this e-mail by anyone else is unauthorised. If you are not the intended recipient, please notify Airbus immediately and delete this e-mail. Airbus cannot accept any responsibility for the accuracy or completeness of this e-mail as it has been sent over public networks. If you have any concerns over the content of this message or its Accuracy or Integrity, please contact Airbus immediately. All outgoing e-mails from Airbus are checked using regularly updated virus scanning software but you should take whatever measures you deem to be appropriate to ensure that this message and any attachments are virus free.

_______________________________________________
USRP-users mailing list --usrp-users@lists.ettus.com
To unsubscribe send an email tousrp-users-le...@lists.ettus.com
UHD_RFNOC_DIR=/usr/share/uhd/3.15.0/rfnoc
export UHD_RFNOC_DIR


In your .bashrc
_______________________________________________
USRP-users mailing list -- usrp-users@lists.ettus.com
To unsubscribe send an email to usrp-users-le...@lists.ettus.com

Reply via email to