Hi,

On 1/9/23 7:31 AM, Marcus Müller wrote:
Hi,

can you share the outputs of

which sh
which benchmark_rate
which uhd_find_devices

with us? Could you also try to search for any "libuhd.dll" on your system, and verify that only there's only the one that you expect to be there?

The person actually in charge of maintaining the UHD package for anaconda was pretty certain that the build of the UHD library used when you run `benchmark_rate` is not the one from the anaconda repo; so, the problem persists that for some reason, a wrong UHD library being loaded instead of the one that your build or anaconda's build.

I just fired up my VM and checked my radioconda environment with UHD 4.3, and it does actually identify itself with the line

[INFO] [UHD] Win32; Microsoft Visual C++ version 14.2; Boost_107800; UHD_4.3.0.0-release

including the "Win32". So I take it back: it is reasonable to conclude that this is not a case of mixed installations.

That's as far as I can take it, unfortunately, since running `benchmark_rate` with my B200mini works as expected.

Cheers,
Ryan


Best regards,
Marcus

DISCLAIMER: Any attached Code is provided As Is. It has not been tested or validated as a product, for use in a deployed application or system, or for use in hazardous environments. You assume all risks for use of the Code. Use of the Code is subject to terms of the licenses to the UHD or RFNoC code with which the Code is used. Standard licenses to UHD and RFNoC can be found at https://www.ettus.com/sdr-software/licenses/.

NI will only perform services based on its understanding and condition that the goods or services (i) are not for the use in the production or development of any item produced, purchased, or ordered by any entity with a footnote 1 designation in the license requirement column of Supplement No. 4 to Part 744, U.S. Export Administration Regulations and (ii) such a company is not a party to the transaction.  If our understanding is incorrect, please notify us immediately because a specific authorization may be required from the U.S. Commerce Department before the transaction may proceed further.

On 09.01.23 08:19, henry.powell...@gmail.com wrote:

Hello, again.

My system is 64bit and I made uhd installation again without anaconda complying with “Building and Installing UHD from source” from here: https://files.ettus.com/manual/page_build_guide.html

So, when i try uhd_find_devices, it works no problem.

But when try “benchmark_rate --tx_rate=6e6 --rx_rate=6e6”, gave me this error: Error: LookupError: IndexError: multi_usrp: RX channel 1768203151377 out of range for configured RX frontends.

The problem is same.


_______________________________________________
USRP-users mailing list -- usrp-users@lists.ettus.com
To unsubscribe send an email to usrp-users-le...@lists.ettus.com
_______________________________________________
USRP-users mailing list -- usrp-users@lists.ettus.com
To unsubscribe send an email to usrp-users-le...@lists.ettus.com
_______________________________________________
USRP-users mailing list -- usrp-users@lists.ettus.com
To unsubscribe send an email to usrp-users-le...@lists.ettus.com

Reply via email to