dipu@dipu-HP-EliteBook-840-G4:\~/openairinterface5g-develop/openairinterface5g/targets/bin$
sudo -E ./lte-softmodem.Rel14 -O
../../ci-scripts/conf_files/enb.band7.tm1.50PRB.usrpb210.conf -d
\[CONFIG\] get parameters from libconfig
../../ci-scripts/conf_files/enb.band7.tm1.50PRB.usrpb210.conf , debug flags:
0x00000000
\[CONFIG\] function config_libconfig_init returned 0
\[CONFIG\] config module libconfig loaded
\[LIBCONFIG\] config: 1/1 parameters successfully set, (1 to default value)
\# /dev/cpu_dma_latency set to 0us
\[LIBCONFIG\] log_config: 3/3 parameters successfully set, (1 to default value)
\[LIBCONFIG\] log_config: 46/46 parameters successfully set, (40 to default
value)
\[LIBCONFIG\] log_config: 46/46 parameters successfully set, (46 to default
value)
\[LIBCONFIG\] log_config: 15/15 parameters successfully set, (15 to default
value)
\[LIBCONFIG\] log_config: 15/15 parameters successfully set, (15 to default
value)
log init done
Reading in command-line options
\[LIBCONFIG\] (root): 21/21 parameters successfully set, (18 to default value)
\[LIBCONFIG\] (root): 5/5 parameters successfully set, (4 to default value)
Getting ENBSParams
\[LIBCONFIG\] (root): 3/3 parameters successfully set, (1 to default value)
\[LIBCONFIG\] THREAD_STRUCT.\[0\]: 2/2 parameters successfully set, (0 to
default value)
\[LIBCONFIG\] THREAD_STRUCT.\[0\]: 2/2 parameters successfully set, (0 to
default value)
Configuration: nb_rrc_inst 1, nb_L1_inst 1, nb_ru 1
\[LIBCONFIG\] loader: 2/2 parameters successfully set, (2 to default value)
\[LIBCONFIG\] loader.NB_IoT: 2/2 parameters successfully set, (1 to default
value)
\[LOADER\] library libNB_IoT.so is not loaded: libNB_IoT.so: cannot open shared
object file: No such file or directory
nb_nbiot_rrc_inst 0, nb_nbiot_L1_inst 0, nb_nbiot_macrlc_inst 0
\[LIBCONFIG\] TTracer: 4/4 parameters successfully set, (4 to default value)
configuring for RAU/RRU
CPU Freq is 2.712165
ITTI init, useMME: 1
\[TMR\] Starting itti queue: TASK_UNKNOWN as task 0
\[TMR\] Starting itti queue: TASK_TIMER as task 1
\[TMR\] Starting itti queue: TASK_L2L1 as task 2
\[TMR\] Starting itti queue: TASK_BM as task 3
\[TMR\] Starting itti queue: TASK_PHY_ENB as task 4
\[TMR\] Starting itti queue: TASK_MAC_ENB as task 5
\[TMR\] Starting itti queue: TASK_RLC_ENB as task 6
\[TMR\] Starting itti queue: TASK_RRC_ENB_NB_IoT as task 7
\[TMR\] Starting itti queue: TASK_PDCP_ENB as task 8
\[TMR\] Starting itti queue: TASK_DATA_FORWARDING as task 9
\[TMR\] Starting itti queue: TASK_END_MARKER as task 10
\[TMR\] Starting itti queue: TASK_RRC_ENB as task 11
\[TMR\] Starting itti queue: TASK_RAL_ENB as task 12
\[TMR\] Starting itti queue: TASK_S1AP as task 13
\[TMR\] Starting itti queue: TASK_X2AP as task 14
\[TMR\] Starting itti queue: TASK_M2AP_ENB as task 15
\[TMR\] Starting itti queue: TASK_M2AP_MCE as task 16
\[TMR\] Starting itti queue: TASK_M3AP as task 17
\[TMR\] Starting itti queue: TASK_M3AP_MME as task 18
\[TMR\] Starting itti queue: TASK_M3AP_MCE as task 19
\[TMR\] Starting itti queue: TASK_SCTP as task 20
\[TMR\] Starting itti queue: TASK_ENB_APP as task 21
\[TMR\] Starting itti queue: TASK_MCE_APP as task 22
\[TMR\] Starting itti queue: TASK_MME_APP as task 23
\[TMR\] Starting itti queue: TASK_FLEXRAN_AGENT as task 24
\[TMR\] Starting itti queue: TASK_PHY_UE as task 25
\[TMR\] Starting itti queue: TASK_MAC_UE as task 26
\[TMR\] Starting itti queue: TASK_RLC_UE as task 27
\[TMR\] Starting itti queue: TASK_PDCP_UE as task 28
\[TMR\] Starting itti queue: TASK_RRC_UE as task 29
\[TMR\] Starting itti queue: TASK_NAS_UE as task 30
\[TMR\] Starting itti queue: TASK_RAL_UE as task 31
\[TMR\] Starting itti queue: TASK_MSC as task 32
\[TMR\] Starting itti queue: TASK_GTPV1_U as task 33
\[TMR\] Starting itti queue: TASK_UDP as task 34
\[TMR\] Starting itti queue: TASK_CU_F1 as task 35
\[TMR\] Starting itti queue: TASK_DU_F1 as task 36
\[LIBCONFIG\] opt: 3/3 parameters successfully set, (3 to default value)
\[OPT\] OPT disabled
reported resolution = 1 ns
\[HW\] Version: Branch: master Abrev. Hash: 9a06ceba46 Date: Wed Sep 9
16:15:50 2020 +0200
Runtime table
\[PHY\] RC.eNB = 0x5617a4843460
\[LIBCONFIG\] L1s.\[0\]: 24/24 parameters successfully set, (22 to default
value)
\[PHY\] RC.eNB\[0\] = 0x5617a4843510
\[PHY\] RC.eNB\[0\]\[0\] = 0x7fa783aed010
\[ENB_APP\] Initializing northbound interface for L1
\[PHY\] l1_north_init_eNB() RC.nb_L1_inst:1
\[PHY\] l1_north_init_eNB() RC.nb_L1_CC\[0\]:1
\[PHY\] l1_north_init_eNB() RC.eNB\[0\]\[0\] installing callbacks
\[PHY\] read_config_and_init() RC.nb_L1_inst: 1
\[LIBCONFIG\] MACRLCs.\[0\]: 21/21 parameters successfully set, (15 to default
value)
\[LIBCONFIG\] MACRLCs.\[0\]: 21/21 parameters successfully set, (15 to default
value)
\[MAC\] \[MAIN\] Init function start:nb_macrlc_inst=1
\[PDCP\] PDCP layer has been initialized
Configuring local RRC for MACRLC
\[ENB_APP\] sched mode = default 0 \[default\]
\[MAC\] read_config_and_init() RC.nb_macrlc_inst: 1
\[PHY\] l1_north_init_eNB() RC.nb_L1_inst:1
\[PHY\] l1_north_init_eNB() RC.nb_L1_CC\[0\]:1
\[PHY\] l1_north_init_eNB() RC.eNB\[0\]\[0\] installing callbacks
\[LIBCONFIG\] (root): 3/3 parameters successfully set, (1 to default value)
\[LIBCONFIG\] eNBs.\[0\]: 20/20 parameters successfully set, (11 to default
value)
\[RRC\] Instance 0: Southbound Transport local_mac
\[RRC\] Setting node_type to ngran_eNB
\[LIBCONFIG\] eNBs.\[0\].plmn_list.\[0\]: 3/3 parameters successfully set, (0
to default value)
\[RRC\] num component carriers 1
\[RRC\] enb_config::RCconfig_RRC() parameter number: 0, total number of
parameters: 78, ccspath: eNBs.\[0\].component_carriers.\[0\]
\[LIBCONFIG\] eNBs.\[0\].component_carriers.\[0\]: 78/78 parameters
successfully set, (17 to default value)
phich.resource 0 (ONESIXTH), phich.duration 0 (NORMAL)
No eMBMS configuration, skipping it
\[LIBCONFIG\] eNBs.\[0\].component_carriers.\[0\].emtc_parameters: 88/88
parameters successfully set, (88 to default value)
No eMTC configuration, skipping it
\[LIBCONFIG\] eNBs.\[0\].component_carriers.\[0\].SLparameters: 39/39
parameters successfully set, (39 to default value)
No SL configuration skipping it
\[LIBCONFIG\] eNBs.\[0\].srb1_parameters: 6/6 parameters successfully set, (0
to default value)
\[RRC\] Node type 0
\[LIBCONFIG\] (root): 3/3 parameters successfully set, (1 to default value)
\[LIBCONFIG\] NETWORK_CONTROLLER: 6/6 parameters successfully set, (0 to
default value)
\[FLEXRAN_AGENT\] FlexRAN Agent for eNB 0 is DISABLED
\[PDCP\] PDCP layer has been initialized
\[PDCP\] pdcp init,usegtp
\[PDCP\] ENB pdcp will use tun interface for MBMS
\[NETLINK\]Opened socket oaitun_enm1 with fd 80
returnValue 0
returnValue 0
returnValue 0
\[OIP\] Interface oaitun_enm1 successfuly configured, ip address 10.0.2.1,
mask 255.255.255.0 broadcast address 10.0.2.255
\[ENB_APP\] Creating ENB_APP eNB Task
\[TMR\] Created Posix thread TASK_ENB_APP
\[RRC\] Creating RRC eNB Task
\[TMR\] Created Posix thread TASK_RRC_ENB
\[LIBCONFIG\] (root): 3/3 parameters successfully set, (1 to default value)
\[TMR\] Created Posix thread TASK_SCTP
\[RRC\] Entering main loop of RRC message task
\[LIBCONFIG\] eNBs.\[0\]: 20/20 parameters successfully set, (11 to default
value)
\[SCTP\] Starting SCTP layer
\[LIBCONFIG\] eNBs.\[0\].plmn_list.\[0\]: 3/3 parameters successfully set, (0
to default value)
\[TMR\] Created Posix thread TASK_S1AP
\[S1AP\] Starting S1AP layer
\[TMR\] Created Posix thread TASK_UDP
\[UDP\] Initializing UDP task interface
\[UDP\] Initializing UDP task interface: DONE
\[TMR\] Created Posix thread TASK_GTPV1_U
\[LIBCONFIG\] eNBs.\[0\]: 1/1 parameters successfully set, (0 to default value)
\[X2AP\] X2AP is disabled.
\[MAC\] Creating MAC eNB Task
\[GTPV1U\] Initializing GTPU stack 0x5617a3b8ce58
\[TMR\] Created Posix thread TASK_MAC_ENB
\[LIBCONFIG\] eNBs.\[0\].component_carriers.\[0\]: 78/78 parameters
successfully set, (17 to default value)
\[MAC\] Starting main loop of MAC message task
\[RRC\] \[eNB 0\] Received RRC_CONFIGURATION_REQ : 0x5617a4876a4c
\[RRC\] \[FRAME 00000\]\[eNB\]\[MOD 00\]\[RNTI 0\] Init...
\[RRC\] \[FRAME 00000\]\[eNB\]\[MOD 00\]\[RNTI 0\] Checking release
\[RRC\] \[FRAME 00000\]\[eNB\]\[MOD 00\]\[RNTI 0\] Rel14 RRC detected, MBMS
flag 0
\[RRC\] \[eNB 0\] Node type 0
\[RRC\] configuration->schedulingInfoSIB1_BR_r13\[CC_id\] 0
\[RRC\] Configuring MIB (N_RB_DL 50,phich_Resource 0,phich_Duration 0)
\[LIBCONFIG\] eNBs.\[0\].mme_ip_address.\[0\]: 5/5 parameters successfully set,
(0 to default value)
\[RRC\] \[MIB\] systemBandwidth 3, phich_duration 0, phich_resource 0, sfn 0
\[RRC\] \[MIB\] schedulingInfoSIB1 0
\[LIBCONFIG\] eNBs.\[0\].SCTP: 2/2 parameters successfully set, (0 to default
value)
\[LIBCONFIG\] eNBs.\[0\].NETWORK_INTERFACES: 11/11 parameters successfully set,
(2 to default value)
\[GTPV1U\] Configuring GTPu
\[LIBCONFIG\] (root): 3/3 parameters successfully set, (1 to default value)
\[LIBCONFIG\] eNBs.\[0\].NETWORK_INTERFACES: 3/3 parameters successfully set,
(0 to default value)
\[RRC\] \[eNB 0\] Configuration SIB2/3, eMBMS = 0
\[GTPV1U\] Configuring GTPu address : 10.50.150.226 -> e296320a
\[ENB_APP\] default drx 2
\[GTPV1U\] Tx UDP_INIT IP addr 10.50.150.226 (868)
\[RRC\] do_SIB23, size 38
\[MAC\] Configuring MIB for instance 0, CCid 0 : (band 7,N_RB_DL 50,Nid_cell
0,p 1,DL freq 2685000000,phich_config.resource 0, phich_config.duration 0)
\[MAC\] config_mib() NFAPI_CONFIG_REQUEST(num_tlv:16) DL_BW:50 UL_BW:50 Ncp
0,p_eNB 1,earfcn 3400,band 7,phich_resource 0 phich_duration 0
phich_power_offset 6000 PSS 6000 SSS 6000 PCI 0 PBCH repetition 0
\[ENB_APP\] \[eNB 0\] eNB_app_register via S1AP for instance 0
\[MAC\] \[CONFIG\]SIB2/3 Contents (partial)
\[LIBCONFIG\] eNBs.\[0\]: 1/1 parameters successfully set, (1 to default value)
\[MAC\] \[CONFIG\]pusch_config_common.n_SB = 1
\[MAC\] \[CONFIG\]pusch_config_common.hoppingMode = 0
\[MAC\] \[CONFIG\]pusch_config_common.pusch_HoppingOffset = 0
\[MAC\] \[CONFIG\]pusch_config_common.enable64QAM = 0
\[MAC\] \[CONFIG\]pusch_config_common.groupHoppingEnabled = 1
\[MAC\] \[CONFIG\]pusch_config_common.groupAssignmentPUSCH = 0
\[MAC\] \[CONFIG\]pusch_config_common.sequenceHoppingEnabled = 0
\[MAC\] \[CONFIG\]pusch_config_common.cyclicShift = 1
\[UDP\] Initializing UDP for local address 10.50.150.226 with port 2152
\[PHY\] Configuring MIB for instance 0, CCid 0 : (band 7,N_RB_DL 50, N_RB_UL
50, Nid_cell 0,eNB_tx_antenna_ports 1,Ncp 0,DL freq 3400,phich_config.resource
0, phich_config.duration 0)
\[PHY\] Initializing frame parms for N_RB_DL 50, Ncp 0, osf 1
\[PHY\] lte_parms.c: Setting N_RB_DL to 50, ofdm_symbol_size 1024
\[LIBCONFIG\] loader.coding: 2/2 parameters successfully set, (1 to default
value)
\[S1AP\] Registered new eNB\[0\] and macro eNB id 3584
\[S1AP\] \[eNB 0\] check the mme registration state
\[UDP\] Inserting new descriptor for task 33, sd 81
\[UDP\] Initializing UDP for local address 10.50.150.226 with port 2152: DONE
\[SCTP\] sctp_bindx SCTP_BINDX_ADD_ADDR socket bound to : 10.50.150.226
\[SCTP\] Converted ipv4 address 193.166.28.130 to network type
\[SCTP\] connectx assoc_id 10 in progress..., used 1 addresses
\[SCTP\] Inserted new descriptor for sd 83 in list, nb elements 1, assoc_id 10
\[SCTP\] Found data for descriptor 83
\[SCTP\] Received notification for sd 83, type 32769
\[SCTP\] Client association changed: 0
\[SCTP\] ----------------------
\[SCTP\] Peer addresses:
\[SCTP\] - \[193.166.28.130\]
\[SCTP\] ----------------------
\[SCTP\] ----------------------
\[SCTP\] SCTP Status:
\[SCTP\] assoc id .....: 10
\[SCTP\] state ........: 4
\[SCTP\] instrms ......: 2
\[SCTP\] outstrms .....: 2
\[SCTP\] fragmentation : 1452
\[SCTP\] pending data .: 0
\[SCTP\] unack data ...: 0
\[SCTP\] rwnd .........: 106496
\[SCTP\] peer info :
\[SCTP\] state ....: 2
\[SCTP\] cwnd .....: 4380
\[SCTP\] srtt .....: 0
\[SCTP\] rto ......: 3000
\[SCTP\] mtu ......: 1500
\[SCTP\] ----------------------
\[SCTP\] Comm up notified for sd 83, assigned assoc_id 10
\[SCTP\] Found data for descriptor 83
\[SCTP\] Received notification for sd 83, type 32776
\[S1AP\] 3584 -> 00e000
\[SCTP\] Successfully sent 59 bytes on stream 0 for assoc_id 10
\[SCTP\] Found data for descriptor 83
\[SCTP\] Received notification for sd 83, type 32777
\[SCTP\] Found data for descriptor 83
\[SCTP\] \[10\]\[83\] Msg of length 45 received from port 36412, on stream 0,
PPID 18
\[S1AP\] servedGUMMEIs.list.count 1
\[S1AP\] servedPLMNs.list.count 1
\[ENB_APP\] \[eNB 0\] Received S1AP_REGISTER_ENB_CNF: associated MME 1
\[LOADER\] library libcoding.so successfully loaded
\[PHY\] prach_config_common.rootSequenceIndex = 0
\[PHY\] prach_config_common.prach_ConfigInfo.prach_ConfigIndex = 0
\[PHY\] prach_config_common.prach_ConfigInfo.highSpeedFlag = 0
\[PHY\] prach_config_common.prach_ConfigInfo.zeroCorrelationZoneConfig = 1
\[PHY\] prach_config_common.prach_ConfigInfo.prach_FreqOffset = 2
\[PHY\] pusch_config_common.n_SB = 1
\[PHY\] pusch_config_common.hoppingMode = 0
\[PHY\] pusch_config_common.pusch_HoppingOffset = 0
\[PHY\] pusch_config_common.enable64QAM = 0
\[PHY\] pusch_config_common.ul_ReferenceSignalsPUSCH.groupHoppingEnabled = 1
\[PHY\] pusch_config_common.ul_ReferenceSignalsPUSCH.groupAssignmentPUSCH = 0
\[PHY\] pusch_config_common.ul_ReferenceSignalsPUSCH.sequenceHoppingEnabled = 0
\[PHY\] pusch_config_common.ul_ReferenceSignalsPUSCH.cyclicShift = 2
\[PHY\] eNB 0/0 configured
\[RRC\] \[eNB\] handover active state is 0
\[RRC\] \[eNB\] eMBMS active state is 0
\[RRC\] \[FRAME 00000\]\[eNB\]\[MOD 00\]\[RNTI 0\] ENB:OPENAIR RRC IN....
\[ENB_APP\] START MAIN THREADS
RC.nb_L1_inst:1
Initializing eNB threads single_thread_flag:0 wait_for_sync:0
\[PHY\] \[lte-softmodem.c\] eNB structure about to allocated RC.nb_L1_inst:1
RC.nb_L1_CC\[0\]:1
\[PHY\] \[lte-softmodem.c\] eNB structure RC.eNB allocated
\[PHY\] Initializing eNB 0 CC_id 0 single_thread_flag:0
\[PHY\] Initializing eNB 0 CC_id 0
\[PHY\] Registering with MAC interface module
\[PHY\] Setting indication lists
\[PHY\] \[lte-softmodem.c\] eNB structure allocated
wait_eNBs()
Waiting for eNB L1 instances to all get configured ... sleeping 50ms
(nb_L1_inst 1)
RC.nb_L1_CC\[0\]:1
eNB L1 are configured
About to Init RU threads RC.nb_RU:1
Initializing RU threads
configuring RU from file
\[LIBCONFIG\] RUs.\[0\]: 24/24 parameters successfully set, (15 to default
value)
Set RU mask to 1
Creating RC.ru\[0\]:0x5617a48779e0
Setting function for RU 0 to eNodeB_3GPP
\[PHY\] number of L1 instances 1, number of RU 1, number of CPU cores 4
\[PHY\] DJP - delete code above this
/home/dipu/openairinterface5g-develop/openairinterface5g/targets/RT/USER/lte-ru.c:2650
\[PHY\] Copying frame parms from eNB 0 to ru 0
\[PHY\] Initializing RRU descriptor 0 : (local RF,synch_to_ext_device,0)
configuring ru_id 0 (start_rf 0x5617a2ba6080)
\[PHY\] Starting ru_thread 0, is_slave 0, send_dmrs 0
\[PHY\] Initializing RU proc 0 (eNodeB_3GPP,synch_to_ext_device),
\[PHY\] init_RU_proc() DJP - added creation of pthread_prach
\[HW\] \[SCHED\]\[eNB\] ru_thread started on CPU 0, sched_policy = SCHED_FIFO
, priority = 99, CPU Affinity= CPU_0 CPU_1 CPU_2 CPU_3
channel 0, Setting tx_gain offset 0.000000, rx_gain offset 125.000000, tx_freq
2685000000.000000, rx_freq 2565000000.000000
\[PHY\] Initializing frame parms for N_RB_DL 50, Ncp 0, osf 1
\[PHY\] lte_parms.c: Setting N_RB_DL to 50, ofdm_symbol_size 1024
\[HW\] \[SCHED\]\[eNB\] ru_thread_prach started on CPU 3, sched_policy =
SCHED_FIFO , priority = 99, CPU Affinity= CPU_0 CPU_1 CPU_2 CPU_3
\[PHY\] Initializing RU signal buffers (if_south local RF) nb_tx 1
\[PHY\] thread ru created id=28867
\[PHY\] Starting RU 0 (eNodeB_3GPP,synch_to_ext_device),
waiting for sync (ru_thread,-1/0x5617a3576248,0x5617a3cd5c80,0x5617a3b8b880)
\[PHY\] ru_thread_prach() RU configured - RACH processing thread running
\[PHY\] \[INIT\] common.txdata\[0\] = 0x7fa786c30040 (614400 bytes)
\[PHY\] nb_tx 1
\[PHY\] rxdata_7_5kHz\[0\] 0x7fa786bf3040 for RU 0
\[PHY\] \[INIT\] common.txdata_BF= 0x5617a48c9d00 (8 bytes)
\[PHY\] txdataF_BF\[0\] 0x5617a48c9d80 for RU 0
\[PHY\] rxdataF\[0\] 0x5617a48d7e80 for RU 0
\[LIBCONFIG\] loader.oai_device: 2/2 parameters successfully set, (1 to default
value)
\[LOADER\] library liboai_device.so successfully loaded
\[PHY\] Checking for USRPs : UHD 4.2.0.0-0ubuntu1\~bionic1 (4.2.0)
\[INFO\] \[UHD\] linux; GNU C++ version 7.5.0; Boost_106501;
UHD_4.2.0.0-0ubuntu1\~bionic1
\[HW\] Found USRP b200
Found USRP b200
\[INFO\] \[B200\] Detected Device: B210
\[INFO\] \[B200\] Operating over USB 3.
\[INFO\] \[B200\] Initialize CODEC control...
\[INFO\] \[B200\] Initialize Radio control...
\[INFO\] \[B200\] Performing register loopback test...
\[INFO\] \[B200\] Register loopback test passed
\[INFO\] \[B200\] Performing register loopback test...
\[INFO\] \[B200\] Register loopback test passed
\[INFO\] \[B200\] Asking for clock rate 30.720000 MHz...
\[INFO\] \[B200\] Actually got clock rate 30.720000 MHz.
Error: signal 11:
./lte-softmodem.Rel14(signal_handler+0x7c)\[0x5617a2bc639c\]
/lib/x86_64-linux-gnu/libc.so.6(+0x3ef10)\[0x7fa7846ddf10\]
/usr/lib/x86_64-linux-gnu/libuhd.so.4.2.0(+0x33dcf2)\[0x7fa7796f0cf2\]
/usr/lib/x86_64-linux-gnu/libuhd.so.4.2.0(+0x3652ff)\[0x7fa7797182ff\]
/home/dipu/openairinterface5g-develop/openairinterface5g/cmake_targets/lte_build_oai/build/liboai_device.so(device_init+0x9d2)\[0x7fa77a29fae2\]
./lte-softmodem.Rel14(load_lib+0x6f)\[0x5617a2bcac6f\]
./lte-softmodem.Rel14(openair0_device_load+0x24)\[0x5617a2bcaeb4\]
./lte-softmodem.Rel14(init_RU_proc+0x543)\[0x5617a2bb88f3\]
./lte-softmodem.Rel14(init_RU+0x3ec)\[0x5617a2bbcd1c\]
./lte-softmodem.Rel14(main+0x5cb)\[0x5617a2b95e9b\]
_______________________________________________
USRP-users mailing list -- usrp-users@lists.ettus.com
To unsubscribe send an email to usrp-users-le...@lists.ettus.com
