On 2022-08-01 05:00, Cédric Hannotier via USRP-users wrote:
Is it in network mode (desktop runs UHD code) or
embedded mode (desktop -> SSH to the N310 embedded OS -> UHD code)?
If it this in network mode, then it can't work.
1 channel at 41 Msps is almost 1.3 Gbps (41 * 16 * 2) transfer rate
over your 1GbE interface.
Furthermore, by specifying the rx and tx rate,
you start the benchmark in full-duplex (i.e Tx + Rx),
doubling the required transfer rate.
Either way, your network is not capable of handling that transfer rate,
you need to setup a 10GbE network.
1Gig ethernet is full-duplex, so that aspect isn't a problem. But
indeed, the most you can
generally "move" over 1GiGe with USRPs is approximately 25Msps.
I don't know the limitation of the N310 embedded ARM to have an opinion
in embedded mode.
Not a chance that it could support anything more than about 10Msps at
the outside.
Regards
_______________________________________________
USRP-users mailing list -- usrp-users@lists.ettus.com
To unsubscribe send an email to usrp-users-le...@lists.ettus.com
