Sorry, here's the location for 3.13. In this case it's a log2 number again, so 8 means 256 words deep, 9 means 512 words deep, etc.
https://github.com/EttusResearch/fpga/blob/UHD-3.13/usrp3/lib/radio/noc_block_radio_core.v#L60 Wade On Tue, Jun 7, 2022 at 10:28 AM Marcus D. Leech <patchvonbr...@gmail.com> wrote: > On 2022-06-07 11:24, ri28...@mit.edu wrote: > > Wade Fife wrote: > > I'm not very familiar with how those tune commands get translated into > register transactions, but one thought I had is that it may also be issuing > timed commands to the radio. If so, you also might need to make the radio's > control FIFO deeper by updating the "512" number to the depth you need. It > should be a power of 2, so I would try 1024 or 2048, etc. It needs to be > updated in two places to the same value: > > > https://github.com/EttusResearch/uhd/blob/5333d3d12ffc21229ec4203a9ea1c7f68d82e57f/fpga/usrp3/lib/rfnoc/blocks/rfnoc_block_radio/noc_shell_radio.v#L148 > > > https://github.com/EttusResearch/uhd/blob/5333d3d12ffc21229ec4203a9ea1c7f68d82e57f/fpga/usrp3/lib/rfnoc/blocks/rfnoc_block_radio/noc_shell_radio.v#L195 > > Wade > > I’m using UHD 3.13 because I work in an airgapped environment and I > haven’t had time to upgrade. It appears noc_shell_radio.v was added around > UHD 4.0, is there a 3.0 equivalent? > > _______________________________________________ > USRP-users mailing list -- usrp-users@lists.ettus.com > To unsubscribe send an email to usrp-users-le...@lists.ettus.com > > The other thing to consider is that once the RF synthesizer is on > frequency, if you set the rf_freq_policy to NONE, that will prevent it from > touching the synthesizer tuning at all. > > > _______________________________________________ > USRP-users mailing list -- usrp-users@lists.ettus.com > To unsubscribe send an email to usrp-users-le...@lists.ettus.com >
_______________________________________________ USRP-users mailing list -- usrp-users@lists.ettus.com To unsubscribe send an email to usrp-users-le...@lists.ettus.com
