Hello, Ever since updating to UHD 4.1.0.5 (including updating the filesystem and FPGA image on our six N320 USRPs), we occasionally get TDC measurement errors when trying to interact with the radio via UHD. It isn't easily reproducible, but it does happen on different radios maybe once a day or so. I've seen it when using either external time and clock sources or internal (doesn't seem to matter which).
Here is an example of the output of a uhd_usrp_probe when this occurs. ---------------------- [INFO] [UHD] linux; GNU C++ version 7.5.0; Boost_106501; UHD_4.1.0.HEAD-0-g6bd0be9c [DEBUG] [MPMD] Discovering MPM devices on port 49600 [DEBUG] [MPMD] Discovering MPM devices on port 49600 [DEBUG] [MPMD] Discovering MPM devices on port 49600 [DEBUG] [MPMD] Discovering MPM devices on port 49600 [INFO] [MPMD] Initializing 1 device(s) in parallel with args: mgmt_addr=192.168.40.2,type=n3xx,product=n320,serial=31EDED4,fpga=XG,claimed=False,addr=192.168.40.2 [DEBUG] [MPMD] Claiming mboard 0 [DEBUG] [MPMD] Device args: `mgmt_addr=192.168.40.2,type=n3xx,product=n320,serial=31EDED4,fpga=XG,claimed=False,addr=192.168.40.2'. RPC address: 192.168.40.2 [DEBUG] [MPMD] MPM reports device info: addr=192.168.30.2,claimed=True,connection=remote,dboard_0_pid=338,dboard_0_serial=31EBB6F,dboard_1_pid=338,dboard_1_serial=31EBB94,description=N300-Series Device,eeprom_version=3,fpga=XG,fpga_version=8.0,fpga_version_hash=6bd0be9.clean,fs_version=20211215135436,mender_artifact=v4.1.0.5_n3xx,mpm_sw_version=4.1.0.5-g6bd0be9c,mpm_version=4.0,name=ni-n3xx-31EDED4,pid=16962,product=n320,rev=10,rpc_connection=remote,second_addr=192.168.40.2,serial=31EDED4,type=n3xx [DEBUG] [MPMD] Found 8 motherboard sensors. [DEBUG] [MPMD] Initializing mboard 0 [INFO] [MPM.PeriphManager] init() called with device args `fpga=XG,mgmt_addr=192.168.40.2,product=n320,clock_source=internal,time_source=internal'. [INFO] [MPM.Rhodium-0] init() called with args `fpga=XG,mgmt_addr=192.168.40.2,product=n320,clock_source=internal,time_source=internal' [INFO] [MPM.Rhodium-1] init() called with args `fpga=XG,mgmt_addr=192.168.40.2,product=n320,clock_source=internal,time_source=internal' [INFO] [MPM.Rhodium-0.init.LMK04828] LMK initialized and locked! [ERROR] [MPM.Sync-0] TDC measurements show a wide range of values! Check your clock rates for incompatibilities. [INFO] [MPM.Rhodium-1.init.LMK04828] LMK initialized and locked! [ERROR] [RPC] TDC measurement out of expected range! [INFO] [MPM.Rhodium-1.DAC37J82] DAC PLL Locked! [INFO] [MPM.Rhodium-1.AD9695] ADC PLL Locked! [INFO] [MPM.Rhodium-1.init] JESD204B Link Initialization & Training Complete [ERROR] [MPM.RPCServer] init() failed with error: TDC measurement out of expected range! Error: RuntimeError: Error during RPC call to `init'. Error message: TDC measurement out of expected range! ---------------------- If I run uhd_usrp_probe again immediately, it always seems to work fine. I don't think this is specific to any of the 3 valid master clock rates, but I've seen this happen after a fresh reboot of an N320 with a uhd_usrp_probe -- so it should have been set to default parameters. I also feel like it happens after a radio hasn't been in use for a while, but I'm not sure if that is always the case. Does anyone have any idea what might cause this? Thanks, Jim
_______________________________________________ USRP-users mailing list -- usrp-users@lists.ettus.com To unsubscribe send an email to usrp-users-le...@lists.ettus.com
