Hi, You are using a total of 20 MSps.That's a big chunk. Seems your application is not fast enough. It takes ~15' to fill your buffers, then you go into buffer overflow errors. Again this is your application, and you know better how it is implemented.
HTH Nikos.. On Wed, Apr 27, 2022 at 4:10 PM <emanuele.tolo...@intecs.it> wrote: > > Hello, > > I have an USRP X300 configured with two TwinRX sharing the same LO. My > application uses all four RX channels of the SDR, with a sampling rate of 5 > MSps each, continuously receiving samples. > > The problem is that the application starts to output overflow errors, > followed by late command errors, after running smooth for a variable period > of time (usually between 15 minutes - 1 hour). > > The SDR is connected to the host PC with a 1 Gigabit Ethernet connection, and > I’m using UHD v3.13.1.0. > > Do you know what could cause these overflow errors? > > Thank you in advance > > Emanuele > > _______________________________________________ > USRP-users mailing list -- usrp-users@lists.ettus.com > To unsubscribe send an email to usrp-users-le...@lists.ettus.com _______________________________________________ USRP-users mailing list -- usrp-users@lists.ettus.com To unsubscribe send an email to usrp-users-le...@lists.ettus.com
