A new Image is being worked on that has those drivers. Once it has we tested an announcement will be made.
Sent from my iPhone > On Apr 19, 2022, at 2:50 AM, Skorstad, Jørn <j...@nkom.no> wrote: > > > Did you get any feedback from R&D about this matter? Should I raise an issue > on github? > > Jorn > > > On 2022-04-04 03:47, Skorstad, Jørn wrote: > Hello, > > Currently using the E310 SDR together with UHD 4.1.0.4, original image file > downloaded using the tool uhd_images_downloader. I have tried to connect two > different USB-serial converters to the radio. Both returns something like > this in dmesg, and no /dev/tty*** is created: > > [ 1516.703188] usb 1-1-port3: attempt power cycle > [ 1517.382889] usb 1-1.3: new full-speed USB device number 26 using ci_hdrc > [ 1517.822885] usb 1-1.3: device not accepting address 26, error -32 > [ 1517.922941] usb 1-1.3: new full-speed USB device number 27 using ci_hdrc > [ 1518.362912] usb 1-1.3: device not accepting address 27, error -32 > [ 1518.373791] usb 1-1-port3: unable to enumerate USB device > > lsusb shows this line: Bus 001 Device 023: ID 1a86:7523 QinHeng Electronics > HL-340 USB-Serial adapter (WeMos D1 in this case) > > This is probably caused by lack of drivers? Previously we used the old 3.8 > image, where USB serial converters were added without problems. Is it > possible to add support to the new image as well? > > lsb_release -a > LSB Version: n/a > Distributor ID: Alchemy > Description: Alchemy 2021.04 > Release: 2021.04 > Codename: Alchemy-Zeus > > BR > Jorn > > > _______________________________________________ > USRP-users mailing list -- usrp-users@lists.ettus.com > To unsubscribe send an email to usrp-users-le...@lists.ettus.com > I just tried this with a CP2101-based USB serial card, and got the same > result. Nothing in /dev/ttyUSB* or /dev/ttyACM* and no hint that any driver > was loaded. > > I'll see if anyone in Ettus R&D can help. >
_______________________________________________ USRP-users mailing list -- usrp-users@lists.ettus.com To unsubscribe send an email to usrp-users-le...@lists.ettus.com
