Hi Yuriy, The Dual 100 Gigabit Ethernet PCIe Interface Kit (PN 788216-01) includes an NVIDIA MCX516A-CCAT card and one QSFP28 cable for 100 GbE.
The QSFP28 to 4xSFP28 Breakout Cable (PN 788214-01) has one QSFP28 on one end and four SFP28 cables on the other end. It is for connecting up to four 10 GbE ports to the X410. NI also offers 10 Gigabit Ethernet Card for Desktop (PN 783345-0) which is a dual-port 10 GbE Intel E10G42BTDABLK. That's a card you could use with the SFP28 cable ends. If you need 500 MS/s bandwidth, and plan to stream all the data to a host computer, then you will need 100 GbE. If you need 250 MS/s or less, then you can use 10 GbE. Please note that 100 GbE support has not yet been released in UHD (although it is technically available on the open-source master branch), but this feature is planned for an upcoming release. 10 GbE / 250 MS/s is fully supported with the current version of UHD. Thanks, Wade On Fri, Mar 4, 2022 at 2:47 AM Kozlov, Yuriy (Nokia - RU/Saint Petersburg) < yuriy.koz...@nokia.com> wrote: > Hello, > > Which additional communication equipment is needed for using X410 board > and cover 500M samples per second. I see in recommendation "Dual 100 > Gigabit Ethernet PCIe Interface Kit". Is this network card + one qsfp28 > cable? "QSFP28 to 4xSFP28 Breakout Cable" - I am note sure, do I need this > cable if buy "Dual 100 Gigabit Ethernet PCIe Interface Kit"? > > Thanks > _______________________________________________ > USRP-users mailing list -- usrp-users@lists.ettus.com > To unsubscribe send an email to usrp-users-le...@lists.ettus.com >
_______________________________________________ USRP-users mailing list -- usrp-users@lists.ettus.com To unsubscribe send an email to usrp-users-le...@lists.ettus.com
