Finally, I edited the RFNOC image core when I used the default RFNOC image core x300_rfnoc_image_core.yml, and run below command, I could successfully open UHD project in GUI vivado. Thanks very much make X300_HG GUI=1
On Thu, Feb 3, 2022 at 12:13 PM sp h <stackprogra...@gmail.com> wrote: > I reformed my previous post, I used this command, so when I want to build > with GUI=1 option I was faced with some errors > make X300_HG GUI=1 > but when I want to make without GUI=1 option I have not any eros... how > can solve this problem? > > On Mon, Jan 31, 2022 at 2:40 PM sp h <stackprogra...@gmail.com> wrote: > >> when I want to build an FPGA source for x300 (In Ubuntu 20.04, Gnuradio >> 3.8.1, uhd-4.1.0.5) I used the below command: >> >> source setupenv.sh --vivado-path=/home/sp/xilinx/Vivado >> make X300_HG >> >> But I have been faced with these errors... can any idea for solving this >> problem? >> >> [00:00:23] Starting Synthesis Command >> ERROR: [Synth 8-439] module 'rfnoc_block_fft' not found >> [/home/sp/Documents/uhd-4.1.0.5/fpga/usrp3/top/x300/x300_rfnoc_image_core.v:1354] >> ERROR: [Synth 8-6156] failed synthesizing module 'rfnoc_image_core' >> [/home/sp/Documents/uhd-4.1.0.5/fpga/usrp3/top/x300/x300_rfnoc_image_core.v:24] >> ERROR: [Synth 8-6156] failed synthesizing module 'bus_int' >> [/home/sp/Documents/uhd-4.1.0.5/fpga/usrp3/top/x300/bus_int.v:9] >> ERROR: [Synth 8-6156] failed synthesizing module 'x300_core' >> [/home/sp/Documents/uhd-4.1.0.5/fpga/usrp3/top/x300/x300_core.v:9] >> ERROR: [Synth 8-6156] failed synthesizing module 'x300' >> [/home/sp/Documents/uhd-4.1.0.5/fpga/usrp3/top/x300/x300.v:20] >> ERROR: [Common 17-69] Command failed: Synthesis failed - please see the >> console or run log file for details >> [00:03:31] Current task: Synthesis +++ Current Phase: Starting >> [00:03:31] Current task: Synthesis +++ Current Phase: Finished >> [00:03:31] Process terminated. Status: Failure >> >> ======================================================== >> Warnings: 357 >> Critical Warnings: 1 >> Errors: 6 >> >> make[1]: *** [Makefile.x300.inc:127: bin] Error 1 >> make[1]: Leaving directory >> '/home/sp/Documents/uhd-4.1.0.5/fpga/usrp3/top/x300' >> make: *** [Makefile:90: X300_HG] Error 2 >> >>
_______________________________________________ USRP-users mailing list -- usrp-users@lists.ettus.com To unsubscribe send an email to usrp-users-le...@lists.ettus.com
