Hi usrp-users
Has anyone had experience using 10GbE SFP+ modules on the X310 for fibre connections rather than copper? We have an X310 and a 10GbE switch. Both are able to take SFP+ modules. The X310 is programmed with an FPGA image that allows for 1GbE on port 0 and 10GbE on port 1. We have some 1GbE fibre SFP+ modules which work on the switch and the X310 (in either port) for 1Gb ethernet. We have some 10GbE fibre SFP+ modules which work on the switch but won't work on the X310 (in either port). We can use them on the switch to communicate with a 1GbE SFP+ module on the X310 (in either port). We had a similar (but reverse) problem with a 10GbE Cu SFP+ module that would work on the X310 but not in an NIC that we were trying to use at the time. So does anyone have experience with a brand of 10GbE fibre SFP+ module that works with the X310 or is there a reason why this won't work? Thanks! Jonathan Pratt _______________________________________________ USRP-users mailing list -- usrp-users@lists.ettus.com To unsubscribe send an email to usrp-users-le...@lists.ettus.com
