Hi Seckin,
it's unlikely your processor is the problem here – if anything, it's the 40·10⁶·64b/s ~=
2.4 Gigabit per second that you're reading from your storage from two different files.
Storage devices and file systems have pretty non-deterministic and large-variance read
speeds and access times, and this might be a problem here.
Does this also fail if you just connect two "null sources" instead of "file
sources"?
Best regards,
Marcus
DISCLAIMER: Any attached Code is provided As Is. It has not been tested or
validated as a product, for use in a deployed application or system, or for use
in hazardous environments. You assume all risks for use of the Code. Use of the
Code is subject to terms of the licenses to the UHD or RFNoC code with which
the Code is used. Standard licenses to UHD and RFNoC can be found at
https://www.ettus.com/sdr-software/licenses/.
NI will only perform services based on its understanding and condition that the
goods or services (i) are not for the use in the production or development of
any item produced, purchased, or ordered by any entity with a footnote 1
designation in the license requirement column of Supplement No. 4 to Part 744,
U.S. Export Administration Regulations and (ii) such a company is not a party
to the transaction. If our understanding is incorrect, please notify us
immediately because a specific authorization may be required from the U.S.
Commerce Department before the transaction may proceed further.
On 25.01.22 07:20, Seçkin Öncü wrote:
Hello,
I am trying to use both channels of N320 to transmit the recorded files. But after a
certain times it gives “U” error and stop transmits at that channel. (The led light of
ch0 or ch1 turns off). Then it gives again “U” error and the other led turns off. Then
“L” error occurs. The problem happens over 20 MSPS of sample rate. Related figures are
attached.
Why N320 stops transmitting when “U” error occurs? Isn’t it strange?
There is no problem when transmitting on one channel.
I have intel x520-da2 NIC, i7 8700 processor. I think it shouldn’t be a problem to
transmit at 20 Msps sample rate.
Thanks
Seckin
_______________________________________________
USRP-users mailing list -- usrp-users@lists.ettus.com
To unsubscribe send an email to usrp-users-le...@lists.ettus.com
_______________________________________________
USRP-users mailing list -- usrp-users@lists.ettus.com
To unsubscribe send an email to usrp-users-le...@lists.ettus.com
