This feature Jonathon talks about was moved to its own script: https://github.com/EttusResearch/uhddev/blob/master/host/utils/x300_reset.py. This is Py3 compatible.
--M On Sun, Sep 5, 2021 at 6:09 AM Jonathon Pendlum <jonathon.pend...@ettus.com> wrote: > Hi Armin, > > While this is not an official feature and you won't receive any support > for this, you can trigger a reset for X3xx devices with this command: > uhd/firmware/usrp3/x300/x300_debug.py --addr <device IP address> > --poke=0x00100058 --data=1. Note the script is not python3 compatible. > > Jonathon > > On Fri, Sep 3, 2021 at 5:00 AM Armin Ghani <agh...@cttc.es> wrote: > >> Dear Community >> >> I'm working remotely with USRPs. Sometimes due to unknown reasons, USRPs >> go to unknown state where they are still accessible through ping but they >> product error while initializing: >> >> >> Executing: /usr/bin/python3 -u >> /home/.../Documents/.../ml/autoencoder/grc/dnn_ofdm_test.py >> >> >> [INFO] [UHD] linux; GNU C++ version 7.5.0; Boost_106501; >> UHD_3.15.0.HEAD-0-gaea0e2de >> [INFO] [X300] X300 initialization sequence... >> [INFO] [X300] Maximum frame size: 8000 bytes. >> [INFO] [X300] Radio 1x clock: 200 MHz >> [ERROR] [UHD] Exception caught in safe-call. >> in ctrl_iface_impl<_endianness>::~ctrl_iface_impl() [with >> uhd::endianness_t _endianness = (uhd::endianness_t)0] >> at /home/.../Documents/uhd/host/lib/rfnoc/ctrl_iface.cpp:52 >> this->send_cmd_pkt(0, 0, true); -> EnvironmentError: IOError: Block ctrl >> (CE_00_Port_30) no response packet - AssertionError: bool(buff) >> in uint64_t ctrl_iface_impl<_endianness>::wait_for_ack(bool, double) >> [with uhd::endianness_t _endianness = (uhd::endianness_t)0; uint64_t = long >> unsigned int] >> at /home/.../Documents/uhd/host/lib/rfnoc/ctrl_iface.cpp:151 >> >> Traceback (most recent call last): >> File "/home/.../Documents/.../ml/autoencoder/grc/dnn_ofdm_test.py", >> line 1067, in <module> >> main() >> File "/home/.../Documents/.../ml/autoencoder/grc/dnn_ofdm_test.py", >> line 1043, in main >> tb = top_block_cls(cp_len=options.cp_len, fft_len=options.fft_len, >> samp_rate=options.samp_rate, tx_freq=options.tx_freq) >> File "/home/.../Documents/.../ml/autoencoder/grc/dnn_ofdm_test.py", >> line 237, in __init__ >> channels=list(range(0,1)), >> File "/usr/local/lib/python3/dist-packages/gnuradio/uhd/__init__.py", >> line 125, in constructor_interceptor >> return old_constructor(*args) >> File "/usr/local/lib/python3/dist-packages/gnuradio/uhd/uhd_swig.py", >> line 3294, in make >> return _uhd_swig.usrp_source_make(device_addr, stream_args, >> issue_stream_cmd_on_start) >> RuntimeError: EnvironmentError: IOError: Block ctrl (CE_00_Port_30) no >> response packet - AssertionError: bool(buff) >> in uint64_t ctrl_iface_impl<_endianness>::wait_for_ack(bool, double) >> [with uhd::endianness_t _endianness = (uhd::endianness_t)0; uint64_t = long >> unsigned int] >> at /home/.../Documents/uhd/host/lib/rfnoc/ctrl_iface.cpp:151 >> >> >> And the only solution for this is hard resetting the USRP which is a bit >> difficult for me. I'd like to know if there are any other way to solve this >> issue or if you know remote ways to do resetting which is equivalent to >> hard reset. >> >> Regards. >> >> >> -- >> >> Armin Ghani >> >> Research Engineer | Communication Systems Division (CSD) >> >> agh...@cttc.es | +34 93 645 29 08 (2143) >> >> Centre Tecnològic de Telecomunicacions de Catalunya (CTTC) >> >> Av. Carl Friedrich Gauss, 7 - Edifici B4 - PMT >> >> 08860 - Castelldefels (Barcelona, Spain) >> >> www.cttc.cat >> _______________________________________________ >> USRP-users mailing list -- usrp-users@lists.ettus.com >> To unsubscribe send an email to usrp-users-le...@lists.ettus.com >> > _______________________________________________ > USRP-users mailing list -- usrp-users@lists.ettus.com > To unsubscribe send an email to usrp-users-le...@lists.ettus.com >
_______________________________________________ USRP-users mailing list -- usrp-users@lists.ettus.com To unsubscribe send an email to usrp-users-le...@lists.ettus.com
