Hi! Could you tell us which version of UHD / the FPGA code this is?
Best regards, Marcus DISCLAIMER: Any attached Code is provided As Is. It has not been tested or validated as a product, for use in a deployed application or system, or for use in hazardous environments. You assume all risks for use of the Code. Use of the Code is subject to terms of the licenses to the UHD or RFNoC code with which the Code is used. Standard licenses to UHD and RFNoC can be found at https://www.ettus.com/sdr-software/licenses/. NI will only perform services based on its understanding and condition that the goods or services (i) are not for the use in the production or development of any item produced, purchased, or ordered by any entity with a footnote 1 designation in the license requirement column of Supplement No. 4 to Part 744, U.S. Export Administration Regulations and (ii) such a company is not a party to the transaction. If our understanding is incorrect, please notify us immediately because a specific authorization may be required from the U.S. Commerce Department before the transaction may proceed further. On 08.07.21 15:11, jcasallas2...@gmail.com wrote: > > Hi all, > > I am getting this error, when running the following command: > > |rfnoc_image_builder -F ~/uhd/fpga -I ~/rfnoc_ws/rfnoc-protocol/rfnoc/blocks/ > -y > ~/rfnoc_ws/rfnoc-protocol/rfnoc/icores/problock_x310_rfnoc_image_core.yml -t > X310_XG| > > I have checked that the description block yml file is installed correctly in > the > /usr/local/share/uhd/rfnoc/blocks folder, I made sure that it is pointing to > the right > folder Makefile.srcs, I double checked the files in the icores folder are > there and the > image_core.yml file is correct. > > I have created many images before but now creating this fpga image with OOT > does not > work. The only thing different here is that I add this block in a different > module. > > Thanks > > > > > _______________________________________________ > USRP-users mailing list -- usrp-users@lists.ettus.com > To unsubscribe send an email to usrp-users-le...@lists.ettus.com _______________________________________________ USRP-users mailing list -- usrp-users@lists.ettus.com To unsubscribe send an email to usrp-users-le...@lists.ettus.com
