That's not possible; you'll have to use the set_rx_frequency / set_tx_frequency API.
DISCLAIMER: Any attached Code is provided As Is. It has not been tested or validated as a product, for use in a deployed application or system, or for use in hazardous environments. You assume all risks for use of the Code. Use of the Code is subject to terms of the licenses to the UHD or RFNoC code with which the Code is used. Standard licenses to UHD and RFNoC can be found at https://www.ettus.com/sdr-software/licenses/. NI will only perform services based on its understanding and condition that the goods or services (i) are not for the use in the production or development of any item produced, purchased, or ordered by any entity with a footnote 1 designation in the license requirement column of Supplement No. 4 to Part 744, U.S. Export Administration Regulations and (ii) such a company is not a party to the transaction. If our understanding is incorrect, please notify us immediately because a specific authorization may be required from the U.S. Commerce Department before the transaction may proceed further. On 08.07.21 23:20, zhang.we...@gmail.com wrote: > > Hi all, > > > > I am playing with a B210. I noticed the LO TX/RX frequency is initialized to > 1.0GHz > whenever the USRP object is created in Python by /uhd.usrp.MultiUSRP/. I am > trying to > have a different initial frequency, for instance 700MHz, which means that the > LO will > always operate at 700MHz whenever the USRP object is created. Note I do not > want to call > any other API functions after the USRP initialization. Do anyone know how I > can change > the initial LO frequency? Thank you very much for your sharing in advance! > > > > > > Thank you, > > Weite > > > _______________________________________________ > USRP-users mailing list -- usrp-users@lists.ettus.com > To unsubscribe send an email to usrp-users-le...@lists.ettus.com _______________________________________________ USRP-users mailing list -- usrp-users@lists.ettus.com To unsubscribe send an email to usrp-users-le...@lists.ettus.com
