Hi Dario, The FPGA code has the max MTU hard-coded to 10, which matches your block, so that's good. That's the hard limit on CHDR packet size. You also need some headroom for header information, so the limit is less than 8192 bytes of payload. Make sure the MTU for your Ethernet interface is set to something larger than what you need (9000 is a common setting). I would also try setting the streamer args spp, recv_frame_size, and send_frame_size. The spp is in samples and should match the size your block is configured to generate. The *_frame_size arguments are in bytes and need to be bigger than the equivalent spp size. More information on setting these args can be found here:
https://files.ettus.com/manual/page_configuration.html#config_stream_args_args Thanks, Wade On Mon, Jul 5, 2021 at 8:40 PM Dario Pennisi <da...@iptronix.com> wrote: > Hi, > i wrote a custom block and i'm trying to output packets that are around > the size of the MAX MTU directly from my block. since packets have to be > handled by Zynq's ARM i understand the MTU i have to consider is the one > for int0 which is 8000. my block's MTU is set to 10 which, considering a > chdr width of 64 bits makes 8192 bytes if i'm not wrong. When i try to > generate packets of more than 1500 bytes i start to get very bad errors > such as: > > [ERROR] [STREAMER] The receive transport caught a value exception. > ValueError: Bad CHDR header or invalid packet length. > gr::log :WARN: rfnoc_rx_streamer0 - RFNoC Streamer block received error > ERROR_CODE_BAD_PACKET (Code: 0xf) > > is there any hard limit on CHDR packet size? is there any setting anywhere > in the code that limits the length of a packet? > note that i set noc shell to automatically calculate packet lengths as i > set SIDEBAND_AT_END to 1. > thanks, > > Dario Pennisi > > _______________________________________________ > USRP-users mailing list -- usrp-users@lists.ettus.com > To unsubscribe send an email to usrp-users-le...@lists.ettus.com >
_______________________________________________ USRP-users mailing list -- usrp-users@lists.ettus.com To unsubscribe send an email to usrp-users-le...@lists.ettus.com
