On Wed, Apr 28, 2021 at 5:11 PM Eugene Grayver <eugene.gray...@aero.org> wrote:
> Hello, > > I am planning to use an X310 (we have at least 50 of them around 🙂 ) for > an all-hdl project. Has anyone used it w/out RFNoC or UHD? How much setup > for on-board components is there? Can I do it w/out the software running > on a PC? > That's pretty ambitious. >From what I've seen, all the PLL programming, RF switches, and general setup/housekeeping is done in UHD with very little help by way of a soft CPU in the FPGA. I am not sure what your timeline is, but you'd be redoing a lot of engineering effort just to get to a new baseline. You might want to consider a small/cheap SBC with gigabit ethernet that runs linux/UHD and does the housekeeping, and you create your "all-hdl" project as a single RFNoC block. The other RFNoC block you have in there would be the Radio block itself - so the RFNoC infrastructure overhead would be minimized, theoretically. Do you think this is a possibility, or are you really steadfast on really doing an all-hdl project? Brian
_______________________________________________ USRP-users mailing list -- usrp-users@lists.ettus.com To unsubscribe send an email to usrp-users-le...@lists.ettus.com
