Also it may be blowing whatever power budget your port provides. Is it a USB2 or USB3 port?
Sent from my iPhone > On Apr 12, 2021, at 3:36 PM, Marcus D Leech <patchvonbr...@gmail.com> wrote: > > There is no kernel-level > Driver for this device. It’s handled by Libusb > > Sent from my iPhone > >>> On Apr 12, 2021, at 3:34 PM, para...@kwesst.com wrote: >>> >> >> I’ve been poking around trying to find out any more information on my issue >> and I noticed this after running the ‘usb-devices’ command: >> >> T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 10 Spd=480 MxCh= 0 >> >> D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 >> >> P: Vendor=2500 ProdID=0022 Rev=01.00 >> >> S: Manufacturer=Cypress >> >> S: Product=WestBridge >> >> S: SerialNumber=0000000004BE >> >> C: #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=200mA >> >> I: If#=0x0 Alt= 0 #EPs= 0 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) >> >> >> >> The VID/PID are 2500:0022 so this is the B205 I have plugged in, but on the >> very last line it says “Driver=(none). >> >> Could there be something wrong with the UHD installation? Should I try a >> different version than v4.0.0.0? >> >> _______________________________________________ >> USRP-users mailing list -- usrp-users@lists.ettus.com >> To unsubscribe send an email to usrp-users-le...@lists.ettus.com
_______________________________________________ USRP-users mailing list -- usrp-users@lists.ettus.com To unsubscribe send an email to usrp-users-le...@lists.ettus.com
