I have re-imaged the SD card for my E310 with the v4.0.0.0 image. I cannot figure out how to set a static IP address on eth0 at boot-up. I created an /etc/network/interfaces file that looks like this: auto eth0iface eth0 inet staticaddress 192.168.200.2netmask 255.255.255.0 I can run the command "ifup eth0" and bring up the interface with the desired configuration, but it does not initialize when I reboot. The SD image I am using was obtained with the command: uhd_images_downloader -t e310 -t sg3 I built the uhd_images_downloder from source, and it's version is 4.0.0.HEAD-0-g90ce6062. Dennis
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
