Hi, I am trying to get DPDK and UHD working with a Mellanox ConnectX-5 NIC.
I am using UHD-3.15.LTS (the installation was done with PyBOMBS in order to have RFNoC support, I did it following the RFNoC Getting Started guide), with an X310 and running Ubuntu 16.04 on the Host. I have followed the guides Getting Started with DPDK and UHD <https://kb.ettus.com/Getting_Started_with_DPDK_and_UHD> and UHD's manual DPDK page <https://files.ettus.com/manual_archive/v3.15.0.0/html/page_dpdk.html> with no luck. For DPDK, as I am using Ubuntu 16.04, I downloaded from DPDK's download page <https://core.dpdk.org/download/> the recommended DPDK 17.11.10 (LTS) version. About the ConnectX-5, I installed its drivers (the LTS version of MLNX_OFED <https://www.mellanox.com/products/infiniband-drivers/linux/mlnx_ofed>) with "./mlnxofedinstall --upstream-libs --dpdk". The drivers seem to work fine as I am able to run UHD applications using the X310 at 10Gb/s, however when setting "use_dpdk=1" I always get the "[WARNING] [DPDK] Detected use_dpdk argument, but DPDK support not built in." message. My uhd.conf file looks like this: [use_dpdk=1] dpdk-mtu=9000 dpdk-driver=~/dpdk-stable-17.11.10/build/build/drivers ; (not sure about this line as I don't have the /usr/lib/x86_64-linux-gnu/dpdk-17.11-drivers/ directory, maybe this is a clue?) dpdk-corelist=0,1 dpdk-num-mbufs=4095 dpdk-mbufs-cache-size=315 [dpdk-mac=04:3f:72:c3:70:fd] dpdk-io-cpu=1 dpdk-ipv4=192.168.40.1/24 [dpdk-mac=04:3f:72:c3:70:fc] dpdk-io-cpu=1 dpdk-ipv4=192.168.10.1/24 If anyone with this setup has gotten DPDK to work I would appreciate the help very much. Best regards, Jorge
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
