Hi all,
Is it possible to automatically create an rfnoc_block schema with, for
example, 2 inputs and 2 outputs payload stream packets as in the addsub
blockdata using rfnocmodtool?
I can generate it using rfnoc_create_verilog.py through a block.yml file
following the steps in :
https://kb.ettus.com/Getting_Started_with_RFNoC_in_UHD_4.0#Generating_Your_Block_Using_the_ModTool
But I don't know the steps to do that using rfnocmodtool, it always
generates a 1 input, 1 output block with axis_pyload_ctxt interface even
though the block.yml generated in block folder has axis_data interface:
*schema: rfnoc_modtool_argsmodule_name: multinoutversion: 1.0rfnoc_version:
1.0chdr_width: 64noc_id: 0x4321makefile_srcs:
"/home/usr/rfnoc/src/gr-ettus/rfnoc-prueba/rfnoc/fpga/rfnoc_block_multinout/Makefile.srcs"*
*clocks: - name: rfnoc_chdr freq: "[]" - name: rfnoc_ctrl freq:
"[]" - name: ce freq: "[]"control: sw_iface: nocscript fpga_iface:
ctrlport interface_direction: slave fifo_depth: 32 clk_domain: ce
ctrlport: byte_mode: False timed: False has_status: Falsedata:
fpga_iface: axis_data clk_domain: ce inputs: in: item_width: 32
nipc: 1 info_fifo_depth: 32 payload_fifo_depth: 32
format: int32 mdata_sig: ~ outputs: out: item_width: 32
nipc: 1 info_fifo_depth: 32 payload_fifo_depth: 32 format:
int32*
* mdata_sig: ~*
Can I modify this file and somehow reload the files generated in the first
attempt or is there other way to do what I want?
Kind Regards,
Maria
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
