Hello, Does anyone know what the *TX* noise figure (output SNR) of the UBX160 is? Roughly? For simplicity, can neglect phase noise and assume white noise floor.
In words, if I transmit a full-scale sinusoidal signal, what will be the noise floor around that signal? Of course, this will depend on TX Gain setting. For example, a -3dBFS signal at TX gain 25 gives -3+25-5.56 = 16.44dBm. What will roughly be the noise power (and hence SNR)? Thanks, Lukas PS: Usually we are interested in receiver (not transmitter) noise but the TX SNR can be relevant for self-interference. _______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
