The quick answer is switch the bsp layer from meta-e31x-mender
to meta-e31x and see what happens. I find I ahve to fiddle a lot with the ettus builds, so it does help to know OpenEmbedded/Yocto. Anyone know the status of the clock speed issue I reported a while back? A quick scan of metta-ettus shows no updates since Sep 13. Philip On 11/20/20 10:44 AM, Ben Magistro via USRP-users wrote: > I'm open to that idea but am not familiar with openembedded/yocto/mender or > what that process would look like (and the little bit of googling hasn't > shed enough light yet) so I fall back to the tools that I have found and > that is the ettus docker container with oe-build ( > https://github.com/EttusResearch/ettus-docker/tree/master/oe-build) and the > instructions there. As far as I know I only need the sdimg, but this goes > back to not being familiar with the build process so I could be off base. > Looking at the `setup_build_env.sh` script, mender seems to be tied in both > as a layer and what the image may inherit from. I don't know if it is as > simple as removing the references to mender in that file and calling build > or if that will break the resulting image (technically already broken since > it segfaults for me -- libfftw see > http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/2020-November/063062.html) > but I'd like to know I'm not introducing new problems at the same time I am > trying to resolve my first problem. > > Ben > > On Thu, Nov 19, 2020 at 5:22 PM Philip Balister <phi...@balister.org> wrote: > >> Build without mender? >> >> Philip >> >> On 11/19/20 4:51 PM, Ben Magistro via USRP-users wrote: >>> I've been trying to rebuild meta-ettus (in this case -v4.0.0.0) with >> debug >>> enabled but am hitting an issue with image size being larger than an 8GB >> sd >>> card and can't seem to get past that. It says I should increase >>> `MENDER_STORAGE_TOTAL_SIZE_MB` if the actual size is larger but >> increasing >>> this in `local.conf` this seems to have no effect. I am using the ettus >>> docker image for oe-builder with the command >>> `./meta-ettus/contrib/build_imgs_package.sh e310_sg3 v4.0.0.0`. For the >>> debug portion I've added a few lines to `build/conf/local.conf` to add >> the >>> packages. Anyone know how to increase the total storage size so that it >>> can build the image? >>> >>> Thanks in advance. >>> >>> >>> _______________________________________________ >>> USRP-users mailing list >>> USRP-users@lists.ettus.com >>> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com >>> >> > > > _______________________________________________ > USRP-users mailing list > USRP-users@lists.ettus.com > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com > _______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
