Pretty much any SFP+ to RJ-45 adapter should work. I have had very good
success with some generics from Amazon as well as some from fs.com . Note
that if your 10 GbE adapter provides SFP+ (not RJ-45), then using a DAC
cable ("direct attach copper": SFP+ <-> SFP+, without the RJ-45 conversion)
is a -lot- less expensive than RJ-45 <-> CAT6/7 <-> RJ-45 to SFP+ ...
Cheers! - MLDOn Tue, Oct 13, 2020 at 11:47 AM Derek Steinkamp via USRP-users < usrp-users@lists.ettus.com> wrote: > I use the “QNAP” branded one on amazon with a cheapo 2m active SFP cable > and it works just fine on my N300! > > Derek > > On Tue, Oct 13, 2020 at 10:43 AM Jeff S via USRP-users < > usrp-users@lists.ettus.com> wrote: > >> I acquired a Thunderbolt 10 Gigabit adapter, and I was wondering if I >> could connect it to the SFP+ connector on my X310. >> >> Has anyone done this? And, is there a particular SFP+ to RJ45 which >> works well? All I see on the Ettus website is the recommendation for using >> the terminated cable and PC network adapter. >> >> Thanks, >> Jeff >> _______________________________________________ >> USRP-users mailing list >> USRP-users@lists.ettus.com >> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com >> > _______________________________________________ > USRP-users mailing list > USRP-users@lists.ettus.com > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com >
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
