Hi Michael, Thanks for the valuable information.
Is there any external software which will sync this both *Internally*? If yes, How? Please share the details of *external hardware required for this both devices to synchronize*. Regards, Rigiel On Mon, Oct 5, 2020 at 8:07 PM Michael Dickens <michael.dick...@ettus.com> wrote: > Hi Rigiel - At least in theory both the Bladerf XA4 and USRP B210 provide > external input for a 10 MHz REF, which -might- allow for some sense of > synchronization between them. It's really not clear to me whether that will > be enough, and whether the software controlling these devices can be > coerced into producing even vaguely time-aligned samples based on the > common REF signal. Maybe others here have used this particular combination > of SDR hardware in a synchronized manner? Good luck! - MLD > > > On Mon, Oct 5, 2020 at 2:37 AM Anes Rose Rigiel Anony via USRP-users < > usrp-users@lists.ettus.com> wrote: > >> Hi Team, >> >> We are using *Bladerf XA4 as Base station 1 and USRP B210 as Base >> Station 2*. Since both devices use an internal clock as the clock >> source, both are *not in sync* so our application fails. >> >> I need to sync these both devices. >> >> *Is there any way to synchronize without an external clock and with an >> external clock?* >> >> Please share the detailed information on this. >> >> -- >> Regards, >> Rigiel, >> Cellular. >> >> Disclaimer:This message is intended only for the designated recipient(s). >> It may contain confidential or proprietary information and may be subject >> to other confidentiality protections. If you are not a designated >> recipient, you may not review, copy or distribute this message. Please >> notify the sender by e-mail and delete this message. GlobalEdge does not >> accept any liability for virus infected mails. >> _______________________________________________ >> USRP-users mailing list >> USRP-users@lists.ettus.com >> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com >> > -- Regards, Rigiel, Cellular. -- Disclaimer:This message is intended only for the designated recipient(s). It may contain confidential or proprietary information and may be subject to other confidentiality protections. If you are not a designated recipient, you may not review, copy or distribute this message. Please notify the sender by e-mail and delete this message. GlobalEdge does not accept any liability for virus infected mails.
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
