Hi Andreas, Great job. Hope this issue can be solved as soon as possible.
Best regards, Damon On Wed, 26 Aug 2020 at 00:42, <andreas.bertheus...@kongsberg.com> wrote: > Thanks Rob. > > > > I have registered the issue in > https://github.com/EttusResearch/uhd/issues/367 and nagged their support > email. > > > > Andreas. > > > > *From:* Rob Kossler <rkoss...@nd.edu> > *Sent:* 25. august 2020 15:59 > *To:* Bertheussen, Andreas <andreas.bertheus...@kongsberg.com> > *Cc:* usrp-users <usrp-users@lists.ettus.com> > *Subject:* Re: [USRP-users] Issues with multi-usrp and UHD > > > > Hi Andreas, > > You might want to verify that benchmark_rate also misbehaves if you use > "--ref=external --pps=external". I wasn't able to do this because I don't > have an external reference handy. Regarding reporting of the bug, you could > do so with gihub as you suggested, but I have been lazy in the past and > just sent an email to "supp...@ettus.com". This generally just causes > them to create the issue. > > > > Regarding UHD logging, take a look at this link > <https://urldefense.com/v3/__https:/files.ettus.com/manual/log_8hpp.html*loghpp_logging__;Iw!!L8f3-wPVSng!S9U4pGFMepWOhBZhYhMgM4Eo2h_07u38lX5tJPAyLiWoNH0NpuAgOZuZcxpPHq1XSw3UQgcn0A$>. > Below are the commands I used in Ubuntu prior to running the program. This > capability should work with any program that uses UHD including your custom > program. For my own custom program, I also use the UHD logging commands in > my source code such as UHD_LOGGER_INFO() and UHD_LOGGER_DEBUG() to print > messages to the user rather than using std::cout. > > > > export UHD_LOG_LEVEL=trace > > export UHD_LOG_CONSOLE_LEVEL=trace > > export UHD_LOG_FILE_LEVEL=trace > > export UHD_LOG_FILE=uhd.log > > > > Rob > > > > On Tue, Aug 25, 2020 at 8:21 AM <andreas.bertheus...@kongsberg.com> wrote: > > Rob > > I ran benchmark_rate --args=="addr0=192.168.10.2,addr1=192.168.110.2" > --tx_rate 5e6 --tx_channels="0,2" > And I observed the same issue I described earlier – mostly that ether > channels 0,1 or channels 2,3, or very rarely channels 0,2 get enabled. > When I add “skip_dram=1” to args, the channel mapping is correct! It is > prone to underruns but now I can proceed a bit further with my UHD software. > > How did you make the trace log? And did you do it to my program or to the > benchmark_rate program? > > It is definitely a severe issue I would expect to be fixed, so I will > report it. Is creating a Github issue the proper avenue? > > Many thanks for helping track this down, Rob! > > Regards, > Andreas. > > > ________________________________ > > CONFIDENTIALITY > This e-mail and any attachment contain KONGSBERG information which may be > proprietary, confidential or subject to export regulations, and is only > meant for the intended recipient(s). Any disclosure, copying, distribution > or use is prohibited, if not otherwise explicitly agreed with KONGSBERG. If > received in error, please delete it immediately from your system and notify > the sender properly. > >
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
