That works fine, but I had to change the uhd version to the last one (3.15). Just for information,That does not work on 3.11.
Many thanks David Le dim. 26 juil. 2020 à 21:04, Marcus D. Leech <patchvonbr...@gmail.com> a écrit : > On 07/26/2020 02:59 PM, David Carsenat wrote: > > I have tried that, but I see 2 issues (but perhaps I'm wrong) : > > - I need 25 Mhz of BW so if I want to push the LO outside, I need to > > have a sample rate of 50 MHz --> difficult to have Tx / Rx loopback. > > - I have tried to set the master clock rate at 60 MHz, the DDC offset > > at 25 MHz, and a sample rate at 25 MHz. I thought that it could work > > but I have a cutoff frequency at 12.5 MHz ... > > > > David > > > Try setting master-clock at 50MHz, and then set the analog bandwidth to > 50MHz. Then use the offset tuning. > > >
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
