Nope. gr-ettus is, plus or minus, integrated into gr-uhd on GR master. - MLD --- Michael Dickens Ettus Research Technical Support Email: supp...@ettus.com Web: https://ettus.com/
On Fri, May 29, 2020 at 5:40 PM Hodges, Jeff <jeff.hod...@gtri.gatech.edu> wrote: > Is gr-ettus still required for rfnoc on master branch? I cannot install > gr-ettus with uhd master and gnuradio master. > > > > When I run gnuradio-companion the rfnoc blocks are missing. > > > > Jeff > > > > *From:* Michael Dickens <michael.dick...@ettus.com> > *Sent:* Friday, May 29, 2020 8:31 AM > *To:* Hodges, Jeff <jeff.hod...@gtri.gatech.edu> > *Cc:* usrp-users@lists.ettus.com > *Subject:* Re: [USRP-users] creating an rfnoc block on master branch > > > > Hi Jeff - The new tool is called "rfnoc_create_verilog" ... it's located > in the UHD repo as "host/utils/rfnoc_blocktool/rfnoc_create_verilog.py". - > MLD > > --- > > Michael Dickens > Ettus Research Technical Support > Email: supp...@ettus.com > Web: https://ettus.com/ > > > > > > On Thu, May 28, 2020 at 11:54 PM Hodges, Jeff via USRP-users < > usrp-users@lists.ettus.com> wrote: > > I also would like to know the answer to Rob’s question: > > > > Rfnocmodtool is in gr-ettus but if I try to install gr-ettus with the uhd > master branch, I get the following error: > > > > > > [ 5%] Building CXX object lib/CMakeFiles/gnuradio-ettus.dir/device3.cc.o > > In file included from /home/nvd/rfnoc/src/gr-ettus/lib/device3.cc:27:0: > > /home/nvd/rfnoc/src/gr-ettus/include/ettus/device3.h:30:10: fatal error: > uhd/device3.hpp: No such file or directory > > #include <uhd/device3.hpp> > > ^~~~~~~~~~~~~~~~~ > > compilation terminated. > > lib/CMakeFiles/gnuradio-ettus.dir/build.make:72: recipe for target > 'lib/CMakeFiles/gnuradio-ettus.dir/device3.cc.o' failed > > make[2]: *** [lib/CMakeFiles/gnuradio-ettus.dir/device3.cc.o] Error 1 > > CMakeFiles/Makefile2:139: recipe for target > 'lib/CMakeFiles/gnuradio-ettus.dir/all' failed > > make[1]: *** [lib/CMakeFiles/gnuradio-ettus.dir/all] Error 2 > > Makefile:140: recipe for target 'all' failed > > make: *** [all] Error 2 > > > > > > So how does rfnoc work with master branch? > > > > > > I have also installed UHD-3.15.LTS without PYBOMBS and there were errors > that have been fixed in the master branch but not UHD-3.15.LTS. > > > > There are no current versions of UHD that work with RFNoC to build OOT > without the PYBOMBS method. > > > > > > > > Jeff > > > > *From:* USRP-users <usrp-users-boun...@lists.ettus.com> *On Behalf Of *Rob > Kossler via USRP-users > *Sent:* Thursday, May 21, 2020 3:19 PM > *To:* usrp-users <usrp-users@lists.ettus.com> > *Subject:* [USRP-users] creating an rfnoc block on master branch > > > > Hi, > > How do I create an rfnoc block using master branch? I am familiar with > using rfnoc_mod_tool with UHD 3.15 and earlier. My understanding was that > things are different with master (and uhd 4.0) such that a different tool > would be used and that this new tool would be part of UHD rather than part > of a gnuradio installation. But, I don't see any such tool in my uhd > master checkout. > > Rob > > _______________________________________________ > USRP-users mailing list > USRP-users@lists.ettus.com > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com > >
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
