Anyway thanks for the help Jonathon Regards Snehasish ________________________________ From: Jonathon Pendlum <jonathon.pend...@ettus.com> Sent: Sunday, April 19, 2020 8:58 AM To: Snehasish Kar <snehasish....@live.com> Cc: usrp-users@lists.ettus.com <usrp-users@lists.ettus.com> Subject: Re: [USRP-users] Fractional downsampling in rfnoc
Hi Snehasish, I forgot about that error. I actually made an issue about it on their repo: https://github.com/SynchronousLabs/rfnoc-SynchronousLabs/issues/2. Unless they provide an EDIF or their source code, you can only use their code for simulation. Certainly a disappointing oversight on their part. Jonathon On Sat, Apr 18, 2020 at 6:21 PM Snehasish Kar <snehasish....@live.com<mailto:snehasish....@live.com>> wrote: Hello Jonathon Tried building the fractional downsampler from synchronous labs and have encountered the following error: source file was generated for simulation and is not permitted as input to synthesis [/home/snehasish/rfnoc-SynchronousLabs/rfnoc/fpga-src/fract_dec_filter.vhd:241995] Can you please help me with it. Regards Snehasish ________________________________ From: Jonathon Pendlum <jonathon.pend...@ettus.com<mailto:jonathon.pend...@ettus.com>> Sent: Friday, April 17, 2020 9:22 PM To: Snehasish Kar <snehasish....@live.com<mailto:snehasish....@live.com>> Cc: usrp-users@lists.ettus.com<mailto:usrp-users@lists.ettus.com> <usrp-users@lists.ettus.com<mailto:usrp-users@lists.ettus.com>> Subject: Re: [USRP-users] Fractional downsampling in rfnoc Hello Snehasish, Unfortunately, the standard library of blocks does not have a Fractional Decimator. Your best bet is to try to use the one made by Synchronous Labs a few years ago. Their code is on github here: https://github.com/SynchronousLabs/rfnoc-SynchronousLabs. Since it was built, RFNoC has had some changes that will need to be fixed, but I think this is your only option versus writing one from scratch. Jonathon On Thu, Apr 16, 2020 at 6:35 PM Snehasish Kar via USRP-users <usrp-users@lists.ettus.com<mailto:usrp-users@lists.ettus.com>> wrote: Hello I am trying to use the RFNOC based M/2 channelizer from https://github.com/theseus-cores/theseus-cores/releases/tag/v1.1.0 . I am trying to divide 25 MHz spectrum into 124 subchannels each of bandwidth 200KHz. I am capturing the signal at 200msps and I need to decimate it to 25.6msps(25MHz/128 channels). Please help me in understanding how this can be achieved using RFNoC, is there’s any block already defined for fractional downsampling. Thanks & Regards Snehasish Get Outlook for iOS<https://aka.ms/o0ukef> _______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com<mailto:USRP-users@lists.ettus.com> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
