On 04/10/2020 09:15 AM, Sam Reiter via USRP-users wrote:
Francisco,
The FPGA update sounds like a good step. I also notice that the
'addr' argument you pass seems to be interpreted as a 'mgmt_addr'
based on the [INFO] output. In newer embedded devices like the N3xx, I
wouldn't expect you to be able to successfully run a uhd_usrp_probe
over that mgmt address - you can't pass CHDR packets over the mgmt
interface. On the N3xx, I'd tell you to connect over the SFP+ port(s)
and try again. The E312 obviously doesn't have SFP+ ports, so I think
you'd need to set it up to operate in "network mode" to enable this
CHDR streaming over the RJ45. I'm not sure what the state of network
mode is on the E31x in UHD 3.15.
Alternatively, you could try SSH'ing into your E312 over that mgmt
port, and then run the uhd_usrp_probe directly on the device. I'd
expect that to work over the mgmt port every time.
-Sam
See:
https://files.ettus.com/manual/page_usrp_e3xx.html#e31x_migration
The Network Mode is no longer supported on E31x with the MPM-based UHD.
UHD 3.15.0.HEAD-0-gaea0e2de
Any clue?
Many thanks!
Francisco
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com <mailto:USRP-users@lists.ettus.com>
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
