Try removing all xml files you have in your OOT IP directory.

On Thu, Feb 20, 2020 at 10:22 PM Rob Kossler via USRP-users <
[email protected]> wrote:

> Unfortunately, I already tried that but no luck.
>
> On Thu, Feb 20, 2020 at 9:54 PM Nick Foster <[email protected]> wrote:
>
>>
>> /home/kossler/nd_overhaul/uhd_nd/rfnoc/testbenches/noc_block_txarb_tb/build-ip/
>>
>> Wipe that whole directory and try it again. If you want to be selective
>> and save some time you can wipe only the axi_mem_64k directory.
>>
>> On Thu, Feb 20, 2020 at 6:13 PM Rob Kossler via USRP-users <
>> [email protected]> wrote:
>>
>>> Hi,
>>> I am having a problem with a Block Memory Generator IP that is working
>>> with 2017.4 but is giving me issues with 2018.3. I have tried to upgrade
>>> the IP as well as re-creating the IP from scratch in 2018.3, but I still
>>> get the same failure (see below).  I have attached the IP created from
>>> scratch in 2018.3.  Any suggestions?  I am not very experienced with FPGA
>>> development in general or Vivado specifically, so it is likely that I am
>>> missing something obvious.
>>>
>>> By the way, I am using the webpack (free) version of Vivado and
>>> attempting to build for the E310.
>>>
>>> Rob
>>>
>>>
>>> kossler@kossler-ThinkPad-P51:~/nd_overhaul/uhd_nd/rfnoc/testbenches/noc_block_txarb_tb$
>>> make xsim
>>> BUILDER: Checking tools...
>>> * GNU bash, version 4.4.20(1)-release (x86_64-pc-linux-gnu)
>>> * Python 2.7.17
>>> * Vivado v2018.3 (64-bit)
>>> ========================================================
>>> BUILDER: Building IP axi_mem_64k
>>> ========================================================
>>> BUILDER: Staging IP in build directory...
>>> BUILDER: Reserving IP location:
>>> /home/kossler/nd_overhaul/uhd_nd/rfnoc/testbenches/noc_block_txarb_tb/build-ip/xc7z020clg484-3/axi_mem_64k
>>> BUILDER: Retargeting IP to part kintex7/xc7z020/clg484/-3...
>>> BUILDER: Building IP...
>>> [00:00:00] Executing command: vivado -mode batch -source
>>> /home/kossler/uhd/UHD-3.15/uhd/fpga-src/usrp3/tools/scripts/viv_generate_ip.tcl
>>> -log axi_mem_64k.log -nojournal
>>> WARNING: [IP_Flow 19-2162] IP 'axi_mem_64k' is locked:
>>> CRITICAL WARNING: [filemgmt 20-1366] Unable to reset target(s) for the
>>> following file is locked:
>>> /home/kossler/nd_overhaul/uhd_nd/rfnoc/testbenches/noc_block_txarb_tb/build-ip/xc7z020clg484-3/axi_mem_64k/axi_mem_64k.xci
>>> CRITICAL WARNING: [filemgmt 20-1365] Unable to generate target(s) for
>>> the following file is locked:
>>> /home/kossler/nd_overhaul/uhd_nd/rfnoc/testbenches/noc_block_txarb_tb/build-ip/xc7z020clg484-3/axi_mem_64k/axi_mem_64k.xci
>>>
>> _______________________________________________
>>> USRP-users mailing list
>>> [email protected]
>>> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>>>
>> _______________________________________________
> USRP-users mailing list
> [email protected]
> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>
_______________________________________________
USRP-users mailing list
[email protected]
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com

Reply via email to