I also meant to say that maybe you could contact someone at Geon Technologies [1], or submit a GitHub Issue in one of the repositories [2,3].
[1] https://geontech.com/redhawk-sdr/ [2] https://github.com/redhawksdr [3] https://github.com/RedhawkSDR/USRP_UHD --Neel Pandeya On Wed, 12 Feb 2020 at 07:57, Neel Pandeya <neel.pand...@ettus.com> wrote: > Hello Joe: > > We do not use Redhawk here, and we do not provide direct support for it. > > We're mostly focused on programming the USRP from UHD/C++ and GNU Radio. > > Is there any mailing list or forum for the Redhawk community? > > I would like to help as much as I can. I know that other people have > successfully used Redhawk before with USRP devices. Let me ask around, and > I'll get back to you privately. > > --Neel Pandeya > > > > On Sun, 9 Feb 2020 at 18:30, Joe crossen via USRP-users < > usrp-users@lists.ettus.com> wrote: > >> Hi all, >> >> I have an E312 and have managed to successfully receive RF and visualize >> in the Redhawk IDE. >> i.e., >> Launched domain on the IDE. >> Launched device manager on the USRP (using nodeBooter command) - which >> appears in the IDE domain. >> Once connected, I am able to plot the device outputs from the IDE. >> >> However I am unable to get the USRP to transmit a waveform created in the >> IDE. >> I can't figure out how to connect the waveform to the transmission >> port... >> Has anyone been able to achieve this? >> >> Thank you, >> Joe >> >> >> >> >> _______________________________________________ >> USRP-users mailing list >> USRP-users@lists.ettus.com >> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com >> >
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
