The green led at the back of the device (port 1) is on and the second on (orange) blink some times. The "link" led at the front of the device not blink.
The result of ethtool on the linux machine for this interface is the following: Supported ports: [ TP ] Supported link modes: 1000baseT/Full 10000baseT/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: Yes Supported FEC modes: Not reported Advertised link modes: 1000baseT/Full 10000baseT/Full Advertised pause frame use: Symmetric Advertised auto-negotiation: Yes Advertised FEC modes: Not reported Speed: 1000Mb/s Duplex: Full Port: Twisted Pair PHYAD: 12 Transceiver: internal Auto-negotiation: on MDI-X: Unknown Supports Wake-on: g Wake-on: g Current message level: 0x00000000 (0) Link detected: yes It seems that only 1000 Mb/s is negociated. Olivier Ravard NovaGrid S.A.S. Le 03/02/2020 à 12:20, Marcus Müller a écrit : > Hi Olivier, > > all this is basically standard Ethernet, so it *should* work. > Do the link indicator LEDs on the USRP blink? > > Best regards, > Marcus > On Mon, 2020-02-03 at 12:14 +0100, Olivier Ravard via USRP-users wrote: >> Hello, >> >> Is it possible to connect a X300 device to a 10Gb/s BaseT network >> using the SFP+ to RJ45 >> adaptator ? >> >> I do this test but I am unablme to ping the device (using >> 192.168.40.2 ip on port 1) >> >> regards, >> >> Olivier >> >> >> _______________________________________________ >> USRP-users mailing list >> USRP-users@lists.ettus.com >> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
signature.asc
Description: OpenPGP digital signature
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
